 Gem Premium join:2005-09-10
·CableOne
| reply to demux Re: upgrading emachines ram
said by demux :
Will it post if you take the pc2700 out and just boot with the pc3200? If not, go into bios and see if there is a setting to disable something like "SPD" auto detect and set it manually to the closest setting the board has. It may be the board tops out at 2700 and yours is 3200 so you need to manually adjust it.
The same problem can occur with incompatible cas latency. Disabling auto-detect in the bios sometimes helps. |