worldofmanda
join:2007-02-13
| reply to pram
Re: CYT Device: Unlocking Information
hi
i have used cyt35 on my vt2442 and now want to add second line from sipgate ar any other free service.
can you please guide on where to change configuration from, i can not change in cyt35 and also cant find where to download file tiYOURMAC from.
all help is appriciated.
thanks. |
|
pram
join:2006-09-01
San Jose, CA | if you have used cyt35, then the vt2442 will no longer work with Vonage(unless you reset it), so you probably do not have even line1 configured. Try cyt4.6 and use one of the template xmls and update vt2442 to configure the lines. |
|
worldofmanda
join:2007-02-13 | hello,
thanks and yes you are right i just realised my phone is not working and i tried looking for cyt4.6 and not available anywhere. so where can i download cyt4.6 please.
thanks. |
|
worldofmanda
join:2007-02-13 | reply to pram
hi found the file, and run it but it removes all the settings and number also. where can i find the setting for vonage please thanks. |
|
pram
join:2006-09-01
San Jose, CA
| well, you cannot have both vonage and a different provider on the same box. Try resetting vt2442 to see if it gets back to the Vonage settings.
snippet from the readme.txt.
--------------------------------------------
Standard Disclaimer:
This program should only be used on devices that are not being
used with a service provider. So, use it with those old and
no-longer-used devices!..
---------------------------------------------
|
|
worldofmanda
join:2007-02-13
| hi,
thanks, i have reset the box and the setting is back, so there is no way to get another provider as well as vonage on line 1 and a different service for line 2.
by the looks of things it seem as if it is possible and only depends on the way it is configured.
any way. is it possible to get 2 numbers for free from any 1 service provider because i want 1 for calls and the other for fax.
thanks. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by worldofmanda  :..., so there is no way to get another provider as well as vonage on line 1 and a different service for line 2. Yes, there is a way and this has been discussed here several times. I am not about to tell you how to do this because your device is still bound to a contract with your VoSP. If your device is not bound to any contract with your VoSP, then make your own XML file to contain your primary/secondary VoIP lines and feed, a.k.a. provision, it to your device. If you don't know how to do this, then it is better to leave your device provisioned by your VoSP. Otherwise, you may run into termination sanctions by your VoSP that may cost you more in the long run. You have been warned!
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
worldofmanda
join:2007-02-13
| hi, ofcourse i am not bound to anything with vonage.
the reason i am here is because they do not offer any support. i own the equipment an i am under no contract and out of there terms and conditions.
i do not know anything about XML. i have downloaded some but not for 2 lines also the settings for vonage are not available anywhere this is the only place things are happening. please help if you can.
thanks. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by worldofmanda :the reason i am here is because they do not offer any support. i own the equipment an i am under no contract and out of there terms and conditions. Who is your VoSP on Line1? If you are not under any contract with any VoSP on Line1, then your device should not be locked by the VoSP. If it is still locked and servicing by VoSP, then you are bound by their TOS, AFAIK.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
worldofmanda
join:2007-02-13
| my 12 months contract is over with vonage. i am still with vonage but not under any contract.
i will leave vonage if i have to but want 2 lines. the only reason i have vonage on first line is because i can make calls to uk and ireland for free and i want 2nd line just for receiving fax. vinage will charge 5.99 for fax line and i really dont want to pay that.
thanks. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by worldofmanda :my 12 months contract is over with vonage. i am still with vonage but not under any contract. But, your Line1 is still bound by the Vonage TOS which I believe doesn't allow any tempering. Like I said in my previous post, the information you want on how to do this is available on this forum. All you need is to search for it.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
worldofmanda
join:2007-02-13 | i will check this with vonage but the vonage setting will not be available can you possible provide me with vonage and sipgate xml settings.
or any 2 free service providers so that i can have 2 lines for incoming fax and calls.
thanks. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by worldofmanda :i will check this with vonage but the vonage setting will not be available can you possible provide me with vonage and sipgate xml settings. Sorry, I am too cheap to use any commercial VoSPs.  So, no Vonage for me. 
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
worldofmanda
join:2007-02-13 | hi,
me 2 am very poor, please guide me on how i can set it up totally free. who wants to pay for something available free.
thanks. |
|
pram
join:2006-09-01
San Jose, CA
| you can probably sign up at freedigits.com or stanaphone.com to get free inbound numbers, dont know how these work with fax. check out faxdigits.com to see if that will suffice. But again, none of them provide you with your local area-code number for free (voicestick.com does, but does not work with vt2442). You may endup getting numbers from Iowa or NY |
|
maps
join:2006-02-26
Garland, TX
| reply to spender
Does anyone know how to get the voice page?
I ran the cyt46 vtech and have the messages that It has been reset the uid/password to Admin/Admin and user/user. However, I login to the website, but Unable to find any option to setup the voip
Thanks for your help!
Lan. |
|
voiplover
Premium
join:2004-05-28
Portsmouth, NH
2 edits | Sorry, but that software doesn't unlock the wrtp54-ER for earthlink. The locks are completely different. If it was another device that you are talking about Maps, then excuse me. |
|
rcilink
Premium
join:2003-12-15
Manchester, NH
| reply to maps
Assuming you are logging-in as Admin with the Password of Admin:
What version firmware is in your VTECH ?
I know of three versions.
•The first version does not have the Line1 settings page needed to set your SIP settings.
•The second version does have those html pages.
•The third version may not unlock using CYT.
The firmware version info should be displayed someplace in there.. |
|
nukleuz
Premium
join:2006-07-23
Columbia, MD
| reply to K
Re: CYT Device: New Release : v3.3 includes Motorola vt2442 !!
i have a pap2 i bought from best buy 2 years ago i believe and i used with vongage.Now i had vonage discontinue my service and i'm trying to unlock it and try some other VOIP services out there but for some reason when i connect the device to my laptop,it does not pull a gateway therefore i cannot enter the router to even begin unlocking it
i used to have an RTP300 i unlocked with no problems a few years back and i gave that to a friend because i thought it was a little bulky now i have this cute one giving me problems
Does anyone know why i cant get into this router or how i should go about this?
--
cpu:quadcore QX6700
video card:evga 8800gtx
mobo:asus striker extreme
ram:2gb dominator pc2 8500c5d
monitor:24" dell ultrasharp
psu:620w enermax infinity |
|
rat478
join:2007-01-20
Austin, TX
| reply to pram
Re: CYT Device: Unlocking Information
Hello,
I have unlocked a VT2442 using CYT4.6 and have configured it for FWD using the attached xml file (after changing the number and password). I am able to receive calls but my am not able to make any outgoing calls (including 613 - echo test). Can anyone please help.
Thanks very much |
|
