bhavin66
@gsk.com | reply to sportq
Re: [General] DLink VTA-VR
I also tried and cyt39c.exe seems to do it but not able to login as Admin/Admin. Only user/user works.
Any ideas ? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to czyc
said by czyc  : quote:
That was me. But, at the moment it looks like I will get no help at all from the post I made there . Information on porting asterisk to a TI-AR7 platform is pretty limited, if not none at all, unfortunately.
I may be able to point you in the right direction. Where are you stuck? I sent you a PM a couple of days back. Have you read it?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
jwx213
join:2006-08-27
Leicester,UK
|  reply to jwx213
Ok, so i read everything like a million times and after doinf a firware upgrade and finding this link:
»192.168.2.45/cgi-bin/webcm?getpa···sion.htm
on my D-Link VTA i got my provisioning file and my Admin password!
Now guys, can anyone tell me whats meant to go where in these boxes as i cant get sipgate on it, or do i need to something more with my decrypted xml file?
Firmware kind of gives you no options for anything!
Please, dont all start asking me how i got my Admin password, it can be done if you think long and hard and read EVERYTHING these clever people put on the posts!
Attached is screen of where im at.
Barrie. |
|
jwx213
join:2006-08-27
Leicester,UK
|  reply to sportq
I also have a D-link VTA-UV in the UK, i have read all threads to the best of my knowledge and cant get into it. After reading sportq as managed to get his unlocked I am encouraged to post the question how did you do it?
Who has the answer, cuz its driving me round the bend not being able to get my Sipgate account up and running on it!
Any help would be great, i have tried all suggestions i could find including CYT 3 through my switch, router and straight forward connection to my LAN on the PC.
Tried SSH and obviously cant get in with user/user.
Any help would be great! 
Barrie. |
|
czyc
join:2006-04-10
| reply to mazilo
quote:
That was me. But, at the moment it looks like I will get no help at all from the post I made there . Information on porting asterisk to a TI-AR7 platform is pretty limited, if not none at all, unfortunately.
I may be able to point you in the right direction. Where are you stuck? |
|
RQH
@covad.net | reply to mazilo
Interesting, can any of you guys please tell me at least how to login with ssh? Do I need a EPROM tools. Can we connect a JTAG or serial port to see what happen there? Thanks |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to sportq
said by sportq :Mazillo, I think it was you who said Asterisk on this box would be a killer. That's right.
I can't agree more. I had a hunt around the openwrt developer forum - saw your posts   . Information on porting asterisk to a TI-AR7 platform is pretty limited, if not none at all, unfortunately.
Any progress? I'm not a programmer but anything I can do to help just ask. I am no programmer too; however, I sure would like to get asterisk to run on a PAP2v2 and VTA-VR. My preference is to work on a PAP2v2. Once this is done, I will also work on my VTA-VR. With its very dimmed LEDs, this device seems to be a nice choice to put in a bedroom. They won't lite up the whole darkness of the room during the night, like a PAP2 and/or PAP2v2 does.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
sportq
join:2006-01-20
UK
| reply to mazilo
Mazillo, I think it was you who said Asterisk on this box would be a killer. I can't agree more. I had a hunt around the openwrt developer forum - saw your posts
Any progress? I'm not a programmer but anything I can do to help just ask.
Peter |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to sportq
said by sportq :My VTA-UV (not -VR) is now unlocked thanks to one of the great folks on here (I won't publically name in case it's sensitive). Don't ask me how it was done as I enabled remote access for the process to be carried out. The cyt tool would not do it. Welcome to the club . At least for the moment, your patience had paid off. Now, it is time to get challenged to play around with your device.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
sportq
join:2006-01-20
UK
| reply to rqh
My VTA-UV (not -VR) is now unlocked thanks to one of the great folks on here (I won't publically name in case it's sensitive). Don't ask me how it was done as I enabled remote access for the process to be carried out. The cyt tool would not do it.
It may be a prerequisite that the box has to be provisioned by Vonage to enable logins other than user/user. Mine was and I was able to login to the web interface as "Support" but cyt still wouldn't have any of it.
Maybe that unlock process will eventually make it's way into a new release of the cyt tool, I don't know.
Pete |
|
rqh
@pacbell.net
| reply to desidude
I have exactly the same problem as desidude.
"
but can't change the password. using cyt30.exe doesn't help and i get a "security violation" just like meister_sd. sshd seems to be running but denies access with user/user username+password combo. pretty much stuck at this point. where to go from here?
"
OP, can you tell us how to ssh login VTA-VR? Thanks |
|
rcilink
Premium
join:2003-12-15
Manchester, NH
| reply to sventhebrit
said by sventhebrit :... Any luck with getting the CYT tool working to unlock a VTA or is the user/pass still an issue. From information I gathered... it is in development. Stay tuned! |
|
sventhebrit
join:2006-08-23
UK | reply to desidude
Hi there,
I have just purchased a VTA-UV in the UK ? Any luck with getting the CYT tool working to unlock a VTA or is the user/pass still an issue.
Thanks
Sven |
|
desidude
@cox.net
| reply to sportq
same findings as meister_sd
basically, can login with
l: user
p: user
but can't change the password. using cyt30.exe doesn't help and i get a "security violation" just like meister_sd. sshd seems to be running but denies access with user/user username+password combo. pretty much stuck at this point. where to go from here? |
|
sportq
join:2006-01-20
UK
1 edit | reply to meister_sd
Ok, stumbled at the first hurdle.....
The only login password combination I have is user/user from the Vonage manual which does work but only gets me into the very limited web management interface (only two tabs "Home" and "Status").
When I run cyt30.exe I get the "Security Violation!" warning so I guess this login isn't sufficent to allow it to work.
Is there another higher level login (tried admin/admin and Admin/Admin)?
Update
Some further info, setting a new password doesn't seem to take, it always reverts to user/user regardless what I set it to.
I also discovered there is an sshd process running, but with a valid login and password it's not much use just now (user/user doesn't work).
Pete |
|
meister_sd
Premium
join:2006-01-29
La Mesa, CA | reply to sportq
The -VR or -UV only means who it's programmed for. This won't affect the ability to unlock it using cyt30, if it does work on it. Please try it and let us know. |
|
