Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Industry Forums » Wireless Service Providers » 15 Mile - NLOS - Suggestions?
Search Topic:
Uniqs:
518
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
2.4gHz WLAN Segment through a bit of foliage? »
« Sales Related question  
page: 1 · 2
AuthorAll Replies

manshack_one

join:2006-08-11
Crockett, TX
reply to rawgerz
Re: 15 Mile - NLOS - Suggestions?

I'm trying to guide myself through a single omni coverage but the Draw button is greyed out. Any tips for a single POP map?


rawgerz
In Debt we trust
Premium
join:2004-10-03
Grove City, PA
reply to manshack_one
It's not actual, it's combind coverage from both points called 'Cartesian'

manshack_one

join:2006-08-11
Crockett, TX
reply to rawgerz
Those are really cool! I got as far as the middle picture but couldn't make the last one with the actual coverage. I'll keep trying. Thanks again!


rawgerz
In Debt we trust
Premium
join:2004-10-03
Grove City, PA
·Verizon Online DSL
·Sprint Mobile Broa..


2 edits
reply to manshack_one
Click for full size
Click for full size
Click for full size
Here's some RM data. You're definatly looking at at least 100Ft towers on each end. This was done with out any tree data because RM doesn't do trees well on 100%. No matter what height you have the units at..

I believe this is with 900Mhz 13dBi yagi's at .5 watts which is way over what you can use but I forgot to change it. Nope it's .2, and just under 4 watts EIRP
--
"Hows your French toast?" "Smelly and ungrateful, but this AMERICAN toast is great!"

manshack_one

join:2006-08-11
Crockett, TX

 reply to lutful
"A RM expert will post a nice coverage map for a 900Mhz AP with omni antenna located at 200ft height at your tower coordinates: 31 18'39'' N 95 26'33" W."

this is going to be good....

manshack_one

join:2006-08-11
Crockett, TX
reply to rawgerz
good point

N 31-26-15
W 95-16-45

lutful
Premium
join:2005-06-16
Ottawa, ON
reply to manshack_one
A RM expert will post a nice coverage map for a 900Mhz AP with omni antenna located at 200ft height at your tower coordinates: 31 18'39'' N 95 26'33" W.


rawgerz
In Debt we trust
Premium
join:2004-10-03
Grove City, PA
reply to manshack_one
for a terrian map you need to have Both site's listed.

manshack_one

join:2006-08-11
Crockett, TX
reply to lutful
Ok. Finally got google up and running. Here's my coord's.

N 31-18-39
W 95-26-33

Send me everything you've got!

lutful
Premium
join:2005-06-16
Ottawa, ON
·TekSavvy Solutions..

reply to manshack_one
I will assume that you want to know if it is possible to provide NLOS coverage in a 15 mile radius from a single tower using 900Mhz equipment?

If you kindly locate the potential tower site, we can easily do Radio Mobile propagation analysis to see what kind of coverage you will get using different tower heights and different foliage assumptions.

EZ Net La

join:2006-08-22
Marthaville, LA

reply to manshack_one
If you are in the Texas Woods, to get a 15 mile shot point to point you'd be best off to start with 900 mhz canopy with a 12 db yagi. You will have to be above the tree tops, and that's at both ends. if you can get up around 300' on the base end the receiver end would only have to be around 50' or so to hit it. if you have your co-ordinates send them to me and I'll email you a comstudy shot so you can see what your terrain is.

slipstream1
Premium
join:2005-11-15
Jacksonville, TX
reply to manshack_one
Besides beating the streets, I don't know. You may be well off the head in the direction of Alto and Wells.

manshack_one

join:2006-08-11
Crockett, TX

reply to slipstream1
Jacksonville huh? I'm in Crockett so you definitely know what I'm talking about. I'll pull up google earth and get strong "guess-timates" of the gps coordinates to let you guys play with. The rural population here is so sparse that it's hard to know which direction to point your antenna. I really need a map showing me where everybody lives. Any good products for something like that?

slipstream1
Premium
join:2005-11-15
Jacksonville, TX

reply to manshack_one
The only drawback is that the link will go out in the freezing or wind driven rain and you have to climb up there and fix it, but that is how my links are here in Jville. I have a program called Micropath. It will do the link analysis' that you will need. Shoot me a message and we can discuss it and see if we can make it work for you.


harmetp

join:2005-09-11
Cropsey, IL

reply to manshack_one
A 15 mile piece of cat 5 wire works in most of these cases, but this is a wireless forum so we won't go their .

Anyway, for most 2.4 and 5.8 gear you really need line of sight, 900 will penetrate more, but it seems (like cell phones in rural areas) that it will penetrate that last wall in a house, but not a forest of trees before the house.

If you have the $, get high enough to get line of sight, otherwise it will be a troublesome link. I have a couple of 10mile links that work great, but their is nothing in the way. When I was setting it up even some dead tree limbs killed the signal.

Hope this helps,

Pat

slipstream1
Premium
join:2005-11-15
Jacksonville, TX
reply to manshack_one
IM me and I will give you as much information as I can. I know what you are dealing with. It looks the same here in Jacksonville.

wgawireless

join:2006-01-19
Carrollton, GA

reply to manshack_one
The best suggestion I can give is to find the GPS coordinates of your two locations and put them into Radio Mobile. If you don't get high enough on both ends of the link, you can have Fresnel zone problems with the earth's curvature and the trees.

If you don't know what Radio Mobile is or how to use it, you could post the coordinates on here and someone will probably take the time to calculate it for you.

manshack_one

join:2006-08-11
Crockett, TX
reply to rawgerz
so, you're saying 2.4ghz might work, given that the trees can be overlooked?

Is there any drawback to placing the first node at 200 or 250 ft?


rawgerz
In Debt we trust
Premium
join:2004-10-03
Grove City, PA
·Verizon Online DSL
·Sprint Mobile Broa..

reply to manshack_one
Well at that distance, your probably only going to be able to just do trial and error. Which would involve climbing a tower(s) and placing radios and antennas. As long as at 100Ft on one or both sides your not going through trees it's possible
--
"Hows your French toast?" "Smelly and ungrateful, but this AMERICAN toast is great!"

manshack_one

join:2006-08-11
Crockett, TX

reply to rawgerz
well, at 15 miles, maybe with a telescope. Seriously, I'm just asking because I don't know. I do know that the earth starts curving at something like six miles so you have to start raising it on both ends to beat that plus you've already got pine tress out the wazoo (highly technical wisp term i understand) that you've got to top also.

I guess I need to find some of that fancy 3d topo software to look at it on the pc first.
Forums » Industry Forums » Wireless Service Providers2.4gHz WLAN Segment through a bit of foliage? »
« Sales Related question  
page: 1 · 2


Friday, 04-Dec 10:31:26 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [163] Comcast Releasing Promised Usage Meter
· [144] Avast Antivirus Has Gone Mad
· [110] Comcast Makes NBC Universal Acquisition Official
· [104] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [90] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [81] Latest Consumer Reports Survey Not Kind To AT&T
· [72] Sprint Defuses GPS Privacy Media Bomb
· [70] Baltimore To Ban Lazy Cable Installs
· [69] FCC Ponders Moving From PSTN To IP Voice
· [64] Broadband Killed The Game Console
Most people now reading
· False positive in Avast! or is it real? [Security]
· Linux is terrorist - according to MS... [All Things Unix]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· Warrior tank seem underpowered these days [World of Warcraft]
· An Excellent Guide About Google Voice And Sip Sorcery [VOIP Tech Chat]
· Connect Blu Ray Player to Internet - Ethernet Port? [Verizon FIOS TV]