adamsge
join:2007-02-03
Pennsauken, NJ | reply to celiomartins
Re: Getting a WRTp54G to take 3.1.17-NA...
I used the Link here to the moded img and all went fine my wrtp54g is now running on 3.1.17-NA Thanks Also will it now be able to take firmware updates now from Linksys or will the files still need to be moded. Thanks again Jerry |
|
GOUKGO
@fewpb.net | reply to radom11
radom11, try this one...www.sipnumber.com
Don't know anything about them but they offer what your looking for, I think.
I've been lurking and have my box up and at about the same place you are...good luck. |
|
radom11
join:2006-08-11
West Sayville, NY
| reply to rcilink
Rcilink,
Thank you for the fast reply.
The unit is displaying only version 3.1.17 it is not indicating NA should it be indicating NA?
I did not do the Hex changes as messages from celiomartins indicated that he did the changes and then put out the image, is that correct?
I located the Ast recipe page that talks about connecting the Linksys PAP2 I will attempt to do so when we have no more users on the pbx later this evening as they are using the Asterisk and I do not want to blow anything, in your reply you indicated that the code was like and feel of a PAP2 will it program the same way?
We will use line one for asterisk pbx to provide the remote animal shelters with home office pbx functionality to the small key systems that they no have in place at the remote locations, can you suggest a free voip incoming service that we can program into line 2 and a config for it?
What is the story with the 3.1.20 that I see is now out?
Your courtesy and help is greatly appreciated.
Many Thanks.
Radom11 |
|
rcilink
Premium
join:2003-12-15
Manchester, NH
| reply to radom11
loading the 3.1.17 (-NA) version on an old vonage box is an excellent choice, as it will remain unlocked..
when you click the "voice" tab, you should now be taken to a new voice section, with menus that look/feel identical to the Linksys PAP2 unit.
Look to the right of the web page, near top and find admin login and click that. Now you can configure Line 1 to your asterisk box and the other line if needed.
I do not suggest changing firmware again, as it is not needed.
Using 3.1.17, the new "Admin" account password is blank (just put username Admin with no password).
If you need help configuring SIP to your asterisk, look for help on Linksys pap2 and asterisk. |
|
radom11
join:2006-08-11
West Sayville, NY
| reply to rcilink
Rclink, 
Please forgive but I am new to all of this and it looks like you are the most knowledgeable individual that helps many
We have 3 units of the WRTP which we are trying to get working for a charity group to who now need to change from "V" (no more money) and use a free Asterisk 2.7 pbx switch that we have built for them and works well in local lan location.
Spent hours reading the messages I then downloaded the wrtp54g_fw_3.1.17_US.img from celiomartins web site and got the image to load into the wrtp54g using the “stock” user/tivonpw unit, All of that was GOOD info and the unit now shows 3.1.17, I did a 60 second reload and router is working and voice section now shows SIP and other setting headers and most fields are blank.
When I downloaded the wrtp54g_fw_3.1.17_US.img from celiomartins web site it was my impression from reading the messages that the hex code changes where done to that image , Yes/No?
Anyway the box is running 3.1.17 but the user/tivonpw password no longer works in trying to do a factory reset or and when I attempt to reload any image , am I hosed?
Any material that we can read that will explain the settings in the wrtp as the booklet that was in the box only talks about “V” system and we need to talk to Asterisk or SIP.
We have wrt1.00.62-NAr6,wrtp54g-3.1.20,image availabel Please help!
Any information is much appreciated, any one knows of a easy step “guide” as this will help many
Many Thanks
Radom11  |
|
rcilink
Premium
join:2003-12-15
Manchester, NH
1 edit | reply to macpas
said by macpas :part 2 celiomartins' file didn't work but i've tried the one from » blog.adonias.cl/leer.php?id=81 metodo 2a and this one worked thakns a lot 4 all participants maciek Thanks for that blog link.. on there one can find WRTP54G 3.1.19 firmware. I have not loaded it yet, but maybe it fixes the line1 / line2 usage issue...
EDIT: I guess I should check the linksys site more! On the site, under SUPPORT/downloads, select WRTP54G for Vonage. You can download 3.1.20 firmware!
Here is a link to a WRTP54G 3.1.20 Linksys page. From there, you can download the firmware:
»www.linksys.com/servlet/Satellit···rWrapper |
|
macpas
@tpnet.pl | reply to macpas
part 2
celiomartins' file didn't work but i've tried the one from »blog.adonias.cl/leer.php?id=81 metodo 2a and this one worked
thakns a lot 4 all participants
maciek |
|
macpas
@tpnet.pl
| reply to santunes
hi!
i'm using WRTP54G for Vonage
i've tried to upgrade celiomartins' img file and got message:
unexpected end of file
at the end of upgrade/upload of firmware
any idea what's wrong?
i would try upload with original linksys img file modified by myself but it's not available at linksys page anymore |
|
santunes
@net.br |  reply to celiomartins
Hi,
I found the problem with img size, it was my download manager.
|
|
santunes
@net.br
|  reply to celiomartins
Hi,
the image file from celiomartins (wrtp54g_fw_3.1.17_USmod.img) only has 2.746.234 bytes and the image (wrtp54g_fw_3.1.17_US.img) from linksys has 3.866.632 bytes, why they are not equal in size if only 5 bytes (offset 23 + checksum) were changed ? |
|
meister_sd
Premium
join:2006-01-29
La Mesa, CA
| reply to celiomartins
said by celiomartins  :To help I did a very easy walkthrough. Wow, that page looks very nice! Did you create it or is it a template? |
|
celiomartins
join:2006-08-19
01333001 | reply to rcilink
To help I did a very easy walkthrough.
And also uploaded the Image file.
you can check here... »celiom.googlepages.com/linksys |
|
