Search:  

 
theme to white backgroundlet page decide theme
HomeFind ServiceReviewsISP NewsFAQsForumsToolsDatabaseAbout 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Industry Forums » Wireless Service Providers » 2.4gHz WLAN Segment through a bit of foliage?
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Links: ·WISP Forum FAQ ·WISP Directory ·WISP Forum Frappr Map ·Radio Mobile
Radiomobile help »
« 15 Mile - NLOS - Suggestions?  

deven07

@charter.com

Re: 2.4gHz WLAN Segment through a bit of foliage?

Nice! Thanks lutful, the DLB2300 looks just right, especially with the built in POE. This solution will actually save me money and it looks like I'm getting way better equipment. The only question I have is the ground...have you used this or similar boxes and can tell me if there is a ground post built into the box that I can run ground wire from, or do I need a inline ethernet ground? Lightning is definately an issue in my neck of the woods!
permalink · 2006-08-22 19:04:55 · Reply to this
lutful
Premium
join:2005-06-16
Ottawa, ON
·TekSavvy Solutions..

Re: 2.4gHz WLAN Segment through a bit of foliage?

Citel or Hyperlink or Teletronics CAT5 lightning protectors will add extra protection to Ethernet port on the DLB2300.

You could bond the PCB metal shield to the protector's ground lug with a heavy gauge wire and then ground the whole system, but there are many different ways.

BTW, very few radios integrate RJ45 lighting/surge protection directly on the PCB like the new DLB2700 PCB. So even if the radio PCB is grounded to metal enclosure, the CAT5 PoE and data signals are not fully protected.
permalink · 2006-08-22 20:32:37 · Print · Reply to this

bito
Premium
join:2001-10-08
Atlanta, GA

Re: 2.4gHz WLAN Segment through a bit of foliage?

Just as a quick clarification, the DLB2700 PCB does not have the surge suppressor built into it. The ethernet surge suppressor is a standalone unit inside the enclosure that grounds to the rest of the internal chasis and then to the external ground screw. You can see the pics on the FCC site for FCC ID RIW-ZW-2000 from Zinwell.

Caleb
permalink · 2006-08-23 10:54:45 · Reply to this
Forums » Industry Forums » Wireless Service ProvidersRadiomobile help »
« 15 Mile - NLOS - Suggestions?  

Friday, 27-Nov 18:32:13 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [119] Time Warner Cable Fires Broadside At Broadcasters
· [111] New AT&T Ad Campaign Hits Back At Verizon
· [95] Apple Joins AT&T Verizon Snark Fest
· [87] New Bill Takes Aim At Higher Verizon ETFs
· [70] TiVo Sees Record Customer Losses
· [68] In-Flight Internet Headed For Bumpy Landing?
· [60] Thanksgiving Open Thread
· [57] Verizon CEO: Hulu Will Be Dead Soon
· [38] EFF Wages War On Fine Print
· [38] ICANN Slams DNS Redirection
Most people now reading
· Windows 7 boot manager editing questions [Microsoft Help]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Leveling to 85 [World of Warcraft]
· [Vista] Why is HD So Full? [Microsoft Help]
· Bell Response to PIPEDA Request [TekSavvy]
· [Newsgroups] Newzleech down? [Filesharing Software]
· Whats the big deal about being "Old School"....? [World of Warcraft]
· Nvidia Forceware for Windows XP\2000\03 195.62 [Software]
· 5 hour energy for diabetic [General Questions]
· HOW-TO: QoS and Tomato (fixes "choppy voice") [MagicJack]