sdgthy
@optonline.net
| reply to flywifiguy
Re: Plug UPS into Extension Cord
Like he said. Just tonight I replaced a UPS on an extension cord, I have one of those refridgerator cords on it. Discovered one of the terminals was burnt. That's a potential fire hazard. I'm gonna have to pickup a new cord and check the power rating.
Also, not sure about others, but APC will void the connected equipment warranty if you use an extension cord. |
|
flywifiguy
join:2006-08-15
Minneapolis, MN | reply to WALL_E
Just make sure your extension cord is heavy gauge enough to handle the maximum current your UPS is rated for. I would recommend 12AWG or larger. |
|
USR56K
join:2000-05-20
Seattle, WA
clubs:
 ·Charter Pipeline
| reply to WALL_E
Yes, it should be ok. It's not recommended for the same reason you're not suppose to plug in high current drawing devices into an extension cord -- it heats up and has the possibility of melting / causing fire / etc.
--
If it's not on Google, then it doesn't exist.
**DC++ FAQ** |
|
WALL_E
Premium
join:2003-05-28
USA
| I would like to locate some equipment (modem/router) in a closet in my house, and connect them to a UPS. However, there is no power outlet in this closet. Is it OK to plug a UPS into a three-pronged extension cord? I have seen warnings not to plug UPS into surge suppressors, and I was wondering if this warning applied to extension cords as well. Thanks in advance.
--
The RIAA - nearly as idiotic as our patent system. |
|
