Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Up and Running » Wireless Networking » Distance / B vs. G vs. N / Adaptors
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Intel Pro 2100 connected to internet but won't resolve URL's »
« help with wired and wireless connections  
AuthorAll Replies

Sneezy

join:2006-01-07
Calgary, AB

reply to tdcinc
Re: Distance / B vs. G vs. N / Adaptors

Actually, I have it on solid grounds that it does reduce performance when you have an 802.11b client logged on a to a network with mainly 802.11g users.

Typically, the rate on the other 802.11g clients drops to in and around the same level as the 802.11b client. Here is a link that states this very same issue, and there are many many more that state the same condition, just Google it.

»compnetworking.about.com/od/wire···11bg.htm

It begins discussing it at bullet #3 down.

But I do agree with you regarding the fact that ANY MIMO router should do a better job of carrying a signal then a conventional router. The DIR-635 that I am using merely takes advantages of both Pre-N features and MIMO. But if you have no need for the features of an 802.11n router then by all means, a MIMO router should indeed work wonders.

And yes, as CCBADD mentioned, the Zyxel X-550 is a very good router. I've had a brief period of use with it and it was quite superb to say the least. SO you could be looking at a 3rd option if you decide to go in that direction.

ccbadd

join:2005-07-03
Corpus Christi, TX

From that link: "More typically the 802.11g clients experience some degradation in performance, but they still perform noticeably faster than their 802.11b counterparts."

802.11b does have some negative impact like I stated before, just not quite as bad as:

"if you have a device connecting to the router that cannot use anything but an 802.11b connection, all of the other devices on your network will also get bumped own to 802.11b speed of 11Mbps".

That is all I wanted to get accross.
Forums » Up and Running » Wireless NetworkingIntel Pro 2100 connected to internet but won't resolve URL's »
« help with wired and wireless connections  


Tuesday, 10-Nov 17:09:47 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [111] Moto Sold About 100,000 Droids
· [93] Verizon Keeps Swinging At AT&T
· [86] VoIP Over 3G Still Not Working For iPhone
· [60] Government Will Release Some Telco Wiretap Lobbying Documents
· [42] Verizon's Hanging Up On Rural America
· [34] Bill Would Force ISPs To Block Financial Scams
· [24] Mediacom Hints At 50, 100 Mbps Speeds
· [21] Sprint Announces Job Cuts
· [18] Clearwire To Get Another $1.5 Billion
· [17] Google Offers Free Holiday Airport Wi-Fi
Most people now reading
· Windows 7 boot manager editing questions [Microsoft Help]
· Google Has Acquired Gizmo5 [VOIP Tech Chat]
· House inspector failed to find major gas leak [Home Repair & Improvement]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· [northeast] Comparison of FiOS Broadband Internet to Comcast Bla [Verizon Fiber Optics]
· [Need Info] IM Programs [Software]
· Framed for child porn 151; by a PC virus [Security]
· Holy work line speeds!! [TekSavvy]
· Water heater pilot light won't light [Home Repair & Improvement]
· [ PVP] 3.2 DK PvP D/W Spec... [World of Warcraft]