jbob
Reach Out and Touch Someone
Premium
join:2004-04-26
Little Rock, AR
 ·Comcast
 ·AT&T Southwest
| reply to USR56K
Re: I need single sided 512 mb Ram
Yes it's 512 total (2 x 256) And you're right about the manual. I hadn't noticed that a 512 is not possible with my current RAM.
The PC2700 was robbed from another system which was upgraded to PC3200 and more of it. Thus why it's in this system. This is a spare system made from spare parts so I'm not that particular about it being a little picky. It's older I know. 
When it's time for a new motherboard I'll be upgrading my main system.
Thanks for the list. |
|
USR56K
join:2000-05-20
Seattle, WA
clubs:
·Charter Pipeline
| reply to jbob
1) You have your significant figures off. You must mean you have two 256MB sticks which equals 512MB. Your end goal is 1GB.
2) According to your motherboards manual, since you currently have 2x256MB 2Bank modules, the max amount of memory your system will support is 768MB. So it's quite possible that if you try to purchase a single sided 512MB module, it will not work properly in DIMM3 (even though you will have not violated the max 5 banks rule set forth by your motherboard).
3) Why do you have PC2700 installed? Seems like a waste since your motherboard only supports PC2100. Sure, I realize PC2700 is backwards compatible, but unless you're overclocking, it's a waste.
4) A quick search on Newegg.com, and I found a stick of Mushkin PC2100 which states its single sided, but it's only 256MB.
While this list isn't specific to your motherboard, it gives you a good overview on the availability of single/double sided memory modules and their sizes. Basically, you're going to be hard pressed to find a single sided 512MB memory stick. Personally, I'd just get a newer motherboard which isn't so picky about memory configurations.
--
If it's not on Google, then it doesn't exist.
**DC++ FAQ** |
|
jbob
Reach Out and Touch Someone
Premium
join:2004-04-26
Little Rock, AR
·Comcast
·AT&T Southwest
| reply to USR56K
It's a A7N266-E. Yes manual says slot 3 will only accept single sided RAM. I'm trying to upgrade to 1 meg as cheap as possible but finding a single sided 512 is difficult. I might just end up purchasing 1 meg of Ram and be done with it. Maybe I can find it cheap enough on Ebay. New will cost around $100.00 |
|
USR56K
join:2000-05-20
Seattle, WA
clubs: | reply to jbob
What motherboard do you have? The manual says slot 3 only accepts single sided RAM? |
|
jbob
Reach Out and Touch Someone
Premium
join:2004-04-26
Little Rock, AR
·Comcast
·AT&T Southwest
| I've got an Asus m/b that has 3 Ram slots. Slots 1 and 2 are populated with 256K(DDR 2700) double-sided chips(512k total). I want to bump the system up to 1 meg however the third slot will only accept single sided ram. To get me up to 1 meg I need a 512 chip however I'm finding it hard to find single sided 512. This board is only a 266 mhz so I really only need PC2100 RAM(cheaper).
I've been looking on eBay but am finding it hard to identify single sided vs double sided Ram. Is there any quick way to know this without having to go to the vendor and checking part numbers? Or asking the sellor? |
|
