vladimir0
join:2006-08-30
| reply to vladimir0
Re: [Equipment] Asterisk on Linksys PAP2v2 and DLink VTA-VR
look what I found..!!
»wiki.openwrt.org/OpenWrtDocs/Har···/WRTP54G
as per this page the ggsip is this radvision sip toolkit..
»www.radvision.com/Products/Devel···col/SIP/
so it might not be dlink hardware properitry at all.. !! above link only works in IE |
|
vladimir0
join:2006-08-30
| reply to mazilo
how about trimming var.tar ? and I think I saw some useless crap about routing and pptp stuff too. also if possible, why not get rid of whole ggsip sip client and use a better sip client (which support all pap2 v1 settings or better) ?
frankly speaking I won't mind just running configurable asterisk without the sip client. it will replace my huge intel box running asterisk.. it can useful to create instant pbx'es when travelling .. since it will run asterisk, it can use IAX to traverse NAT.. could be very useful in cases where internet provider does not allow VoIP |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to rcilink
said by rcilink  :what can I prune out?? What about /usr/sbin/ppdd (about 300KB)?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to madmatrix
said by madmatrix :Could you please tell me what "T" means? Transmit immediately(?)
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
madmatrix
join:2006-09-03
Fairfax, VA | reply to rcilink
Hi rcilink,
Happy to see you again. Could you please tell me what "T" means? Thanks!!!
Lou |
|
rcilink
Premium
join:2003-12-15
Manchester, NH
1 edit | reply to SteveLV702
RE: Asterisk on Linksys PAP2 v2 and D-Link VTA:
I have been working on getting the partitions resized.. that has proven to be lots of fun :)
The thing is tight on space, so something would have to give..
I know that Linksys dropped 'dropbear' (ssh) to save space but that seems important to have.. what can I prune out??
----------------------
About that dialplan stuff on these...
Might this be helpful:
The 'factory' dialplan for the PAP2 v2.0 is:
*xxT|*1xx|[349]11|1xxx[2-9]xxxxxx|[2-9]xxxxxxT|[2-9]xxxxxxxxx|011x.T
to add other dialing, you should be able to add the mapping in there.
For the following number: 0018005551212
This dial map should match: 001[2-9]XXXXXXXXXT |
|
SteveLV702
Premium
join:2004-04-22
Henderson, NV | reply to mazilo
Well the dialplan on the PAP2v2 is
(*xx|*xxxxxxxxx|*xxxxxxxxxxxxx|*xxx|xxx|xxxx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|011xxxxxxxxxx.|011xxxxxxxxxx)
the same as on my WRTP54G-NA and our PAP2-NA which works fine. |
|
