Re: [Equipment] Asterisk on Linksys PAP2v2 and DLink VTA-VR

vladimir0 join:2006-08-30	reply to vladimir0 Re: [Equipment] Asterisk on Linksys PAP2v2 and DLink VTA-VR look what I found..!! »wiki.openwrt.org/OpenWrtDocs/Har···/WRTP54G as per this page the ggsip is this radvision sip toolkit.. »www.radvision.com/Products/Devel···col/SIP/ so it might not be dlink hardware properitry at all.. !! above link only works in IE
	to forum · permalink · · 2006-09-05 23:35:37 ·
vladimir0 join:2006-08-30	reply to mazilo how about trimming var.tar ? and I think I saw some useless crap about routing and pptp stuff too. also if possible, why not get rid of whole ggsip sip client and use a better sip client (which support all pap2 v1 settings or better) ? frankly speaking I won't mind just running configurable asterisk without the sip client. it will replace my huge intel box running asterisk.. it can useful to create instant pbx'es when travelling .. since it will run asterisk, it can use IAX to traverse NAT.. could be very useful in cases where internet provider does not allow VoIP
	to forum · permalink · · 2006-09-05 23:22:47 ·
mazilo From Mazilo Premium join:2002-05-30 Lilburn, GA	reply to rcilink said by rcilink : what can I prune out?? What about /usr/sbin/ppdd (about 300KB)? -- Mazi (UK Non-Geo Phone: +44-703-194-2574)
	to forum · permalink · · 2006-09-05 23:10:50 ·
mazilo From Mazilo Premium join:2002-05-30 Lilburn, GA	reply to madmatrix said by madmatrix : Could you please tell me what "T" means? Transmit immediately(?) -- Mazi (UK Non-Geo Phone: +44-703-194-2574)
	to forum · permalink · · 2006-09-05 23:06:02 ·
madmatrix join:2006-09-03 Fairfax, VA	reply to rcilink Hi rcilink, Happy to see you again. Could you please tell me what "T" means? Thanks!!! Lou
	to forum · permalink · · 2006-09-05 21:59:58 ·
rcilink Premium join:2003-12-15 Manchester, NH 1 edit	reply to SteveLV702 RE: Asterisk on Linksys PAP2 v2 and D-Link VTA: I have been working on getting the partitions resized.. that has proven to be lots of fun :) The thing is tight on space, so something would have to give.. I know that Linksys dropped 'dropbear' (ssh) to save space but that seems important to have.. what can I prune out?? ---------------------- About that dialplan stuff on these... Might this be helpful: The 'factory' dialplan for the PAP2 v2.0 is: xxT\|1xx\|[349]11\|1xxx[2-9]xxxxxx\|[2-9]xxxxxxT\|[2-9]xxxxxxxxx\|011x.T to add other dialing, you should be able to add the mapping in there. For the following number: 0018005551212 This dial map should match: 001[2-9]XXXXXXXXXT
	to forum · permalink · · 2006-09-05 21:57:28 ·


Friday, 04-Dec 11:39:55	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF