claudeo
join:2000-02-23
Redmond, WA
1 edit | reply to nukleuz
Re: vonage linksys wrt54g choppy calls
If it is still under warranty call for a RMA and replacement. Otherwise see the Linksys forum for more expert help. |
|
nukleuz
Premium
join:2006-07-23
Columbia, MD | reply to claudeo
yes im using a wired connection to the router. i called linksys the made me do some settings and it still didnt help |
|
claudeo
join:2000-02-23
Redmond, WA | reply to nukleuz
Do you mean, you have not been able to get control of your router? Are you using a wired connection to the router? |
|
nukleuz
Premium
join:2006-07-23
Columbia, MD | reply to pende_tim
ok all that didnt work.i have tried everything i could |
|
pende_tim
Premium
join:2004-01-04
Andover, NJ | reply to claudeo
claudeo,
sorry to step on your post, I guess we both were responding at the same time.
Tim
--
The difference between genius and stupidity is that genius has its limits. |
|
pende_tim
Premium
join:2004-01-04
Andover, NJ
 ·ProLog
 ·ViaTalk
 ·Verizon Online DSL
| reply to nukleuz
Sounds like the router is having "issues" which may be the root of the problem.
Have you tried to power cycle it off/on?
Does it have the latest firmware? If not go to the linksys site and download the latest for your router's version.
»www.linksys.com/servlet/Satellit···rWrapper
If you know how to re-setup the configuration, press and hold the reset button on the back for about 15 seconds while it is powered up. This will put it back to it's factory settings. To get in to re-configure it, browse to 192.168.1.1
username is blank.
password is admin
Tim
--
The difference between genius and stupidity is that genius has its limits. |
|
nukleuz
Premium
join:2006-07-23
Columbia, MD | reply to claudeo
i'ii report back |
|
claudeo
join:2000-02-23
Redmond, WA
| reply to nukleuz
said by nukleuz  :i cant get in the router to change qos.it just freezes halfway when it says loading settings So it looks like that is the first thing you need to fix. If there is a problem with your router you can't expect the things that depend on it to work smoothly. You should use a wired connection when changing the router settings. If that doesn't work try to reset it. If that doesn't work you may have to try a looooong reset of the router, which will lose all your settings (if any). Disconnect the router from the Internet when you do that, and immediately after the long reset go in and set a strong admin password for the router. Then apply your other settings. First secure the wireless connection with encryption, then reconnect to the Internet and check that that works, then go and tweak your QOS. |
|
nukleuz
Premium
join:2006-07-23
Columbia, MD | reply to pende_tim
i cant get in the router to change qos.it just freezes halfway when it says loading settings |
|
