 realw
@dsl.chic01.pacbell.n | BEFSR41 Help!! Ok, I had a web server running on my dsl connect, and i decieded to get a 4 port router, so i did and hooked it all up. And the net is working on all my computers, and running fast. But for some reason i can't pull up my server from only certian extranal places. I have all the ports forwarded. I have no clue, what could be causeing the problem.
My network is set up like this:
BEFSR41 Router + Westell DSL Modem
Uplink on Router goes to Port 1 on 8 port Switch (linksys), server pluged into port 2 on 8 port switch. All other ports on switch and router are full with other computers.
Thanks,
Daniel
P.S. I'v tried pluging the server directly into the router,and still nothing. |
|
 Bill_MIBill In MichiganPremium,MVM
join:2001-01-03
Royal Oak, MI
kudos:1
 ·Comcast
·WOW Internet and..
| "Some places" is the clue. Are you running PPPoE and it's characteristic MTU of 1492? You could have trouble serving a 1500 MTU network.
This will show up as the bad places being 1500 MTU networks (like cable modems and company LANs) - good places as other PPPoE and dialups. One fix is to set your server box to 1492 MTU.
More info: BEFSR41 (1.39) and VNC on port 21
EDIT: You could have some selective Code Red port 80 filtering, too. However, this MTU thing is something I've been meaning to write up for quite some time. So I did:
MTU, PPPoE, Servers and LinkSys Routers
[text was edited by author 2001-10-31 07:15:48] |
|
realw
@dsl.chic01.pacbell.n | reply to realw
Sure enought! That was it. I would of never guess it to be something like that. Thank you!!
Daniel |
|
