Re: [PAP2] New useful utility for UNLOCKED PAP2's

Author	All Replies
rizzo2dial Premium join:2004-08-05	reply to Umbyboy Re: [PAP2] New useful utility for UNLOCKED PAP2's 1) What host are you using? 2) Have you tested the command line TFTP utility using the same host? Try: quote: tftp -i *host* get *file* where: •*host* is the host name you're trying to connect to •*file* is the name of the remote file to grab (i.e. spa[MAC].xml)
	to forum · permalink · · 2006-10-05 05:05:25 ·
Umbyboy join:2006-09-25 84100	I tried to ping ls.tftp.vonage.net and it's working. where should I put tftp -i ls.tftp.vonage.net get spa[MAC].xml ? I also opened port upd but I still get this message: unable to resolve host ls.tftp.vonage.net
	to forum · permalink · · 2006-10-05 05:45:05 ·
rizzo2dial Premium join:2004-08-05	said by rizzo2dial : 2) Have you tested the command line TFTP utility using the same host? said by Umbyboy : where should I put tftp -i ls.tftp.vonage.net get spa[MAC].xml ? In my original suggestion, the statement "command line TFTP utility" means that you need to type this in a COMMAND PROMPT window. said by Umbyboy : I also opened port upd but I still get this message: unable to resolve host ls.tftp.vonage.net Is "port udp" another application, or did you mean you opened the specific UDP port in your firewall?
	to forum · permalink · · 2006-10-05 12:09:58 ·
Umbyboy join:2006-09-25 84100	Putting the command line I found an xml file in c: is it useful to let VuckVonage work?Yè I opened a specific UDP port but it's still not working!
	to forum · permalink · · 2006-10-05 15:55:22 ·
rizzo2dial Premium join:2004-08-05	said by Umbyboy : I opened a specific UDP port but it's still not working! I take it that means you've opened the specific UDP port (for TFTP purposes) in your firewall. If all other internet connectivity has been blocked to the program, that means DNS resolution has been block as well. According to searches on Google, DNS uses UDP port 53 (although some posts claim it can use TCP port 53 as well). Open up that port too and try again.
	to forum · permalink · · 2006-10-05 22:40:11 ·
Umbyboy join:2006-09-25 84100	I opened both ports but when I try to Download&Decrypt I still get this message: "unable to resolve host ls.tftp.vonage.net".I disabled all firwalls
	to forum · permalink · · 2006-10-06 03:29:08 ·
rizzo2dial Premium join:2004-08-05 1 edit	If you're certain ALL FIREWALLS have been disabled, I guess try the following: 1) Uninstall the program 2) Uninstall the .NET Framework 1.1 3) Re-install the .NET Framework 1.1 4) Re-install the program. If you have access to another computer, try installing it on there to see if it works ok as you're the only person who's reported this issue.
	to forum · permalink · · 2006-10-06 22:59:00 ·
Umbyboy join:2006-09-25 84100	Tnx for the answer:)I'll try and let u know!
	to forum · permalink · · 2006-10-07 03:23:06 ·
platty99 @rogers.com	I was gettiing the "unable to resolve.." error too. I realized I had added info to my windows "hosts" file which was forwarding all requests for ls.tftp.vonage.net to my local server. Once I deleted those new entries, Vuckfonage was able to download and decrypt the file without any problems. The windows "hosts" file is located in C:\WINDOWS\SYSTEM32\DRIVERS\etc\hosts Hope this helps someone.
	to forum · permalink · 2006-10-13 11:25:48 ·
rizzo2dial Premium join:2004-08-05	That's good information. In Umbyboy's case, the command line TFTP and ping utilities resolved the ls.tftp... domain name, so the hosts file was not the issue. I still don't know if the issue was resolved for Umbyboy.
	to forum · permalink · · 2006-10-13 16:48:25 ·


Tuesday, 24-Nov 07:46:49	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF