Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | Re: WGT624 V3 connecting to Vonage router no DHCP help And you have the Netgear hooked-up to the Linksys LAN to LAN port? | |
|
 Craigc540
join:2006-07-19
Moreno Valley, CA
1 edit | Re: WGT624 V3 connecting to Vonage router no DHCP help I have linksys in port #1 lan on netgear and lan #4 going to netgear.
Also I have linsys ip at 192.168.1.1 and netgear at 192.168.1.3 | |
|
 |
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
 ·AT&T Yahoo
| Re: WGT624 V3 connecting to Vonage router no DHCP help LAN port 1 to LAN port 1
Example setup:
Linksys IP:192.168.1.1
Subnet Mask:255.255.255.0
DHCP Server:ON Range of:192.168.1.50 to 192.168.1.100
Netgear IP:192.168.1.3
Subnet Mask:255.255.255.0
DHCP Server:OFF
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. | |
|
| | Craigc540
join:2006-07-19
Moreno Valley, CA | Re: WGT624 V3 connecting to Vonage router no DHCP help So the problem is I have to have ports 1 to 1. | |
|
| | |
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | Re: WGT624 V3 connecting to Vonage router no DHCP help Is wireless SSID broadcast on? | |
|
| | | | Craigc540
join:2006-07-19
Moreno Valley, CA
| Re: WGT624 V3 connecting to Vonage router no DHCP help Yes SSID broadcast is on with wep security. Ok I just got it to give out ip without my laptop having a static ip. I put in a static ip route on the netgear pointing to the Linksys at 192.168.1.1 which works put after I save the setting I can no longer get to the netgear setup page at 192.168.1.3 but the netgear is giving out ip's now. So I don't know if this is the right way to do it since I can no longer able to get to the netgear setup page. | |
|
| | | | |
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
·AT&T Yahoo
| Re: WGT624 V3 connecting to Vonage router no DHCP help The Linksys has an LAN IP of 192.168.1.1 and the Netgear has a LAN IP of 192.168.1.3,right?
And you set it up,as I showed earlier,with the two units connected LAN port to LAN port,WAN port NOT USED on the Netgear?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. | |
|
| | | | | | Craigc540
join:2006-07-19
Moreno Valley, CA | Re: WGT624 V3 connecting to Vonage router no DHCP help Yes that is how I have it. | |
|
| | | | | | |
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | Re: WGT624 V3 connecting to Vonage router no DHCP help Which Linksys Vonage router do you have,RT31P2 or PAP2(T)? | |
|
| | | | | | | | Craigc540
join:2006-07-19
Moreno Valley, CA | Re: WGT624 V3 connecting to Vonage router no DHCP help RT31P2 | |
|
| | | | | | | | |
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | Re: WGT624 V3 connecting to Vonage router no DHCP help According to the RT31P2 Manual,the default IP address is 192.168.15.1 . Did you change it to 192.168.1.1?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. | |
|
| | | | | | | | | Craigc540
join:2006-07-19
Moreno Valley, CA | Re: WGT624 V3 connecting to Vonage router no DHCP help Yes I did change it to be in the range of my network. | |
|
| | | | | | | | |
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | Re: WGT624 V3 connecting to Vonage router no DHCP help Try to see if the PC will get an IP address automatically,with WEP turned off.
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. | |
|
|
|
|
