Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | reply to Craigc540
Re: WGT624 V3 connecting to Vonage router no DHCP help
Try to see if the PC will get an IP address automatically,with WEP turned off.
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. |
|
Craigc540
join:2006-07-19
Moreno Valley, CA | reply to Mountaineer1
Yes I did change it to be in the range of my network. |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | reply to Craigc540
According to the RT31P2 Manual,the default IP address is 192.168.15.1 . Did you change it to 192.168.1.1?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. |
|
Craigc540
join:2006-07-19
Moreno Valley, CA | reply to Mountaineer1
RT31P2 |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | reply to Craigc540
Which Linksys Vonage router do you have,RT31P2 or PAP2(T)? |
|
Craigc540
join:2006-07-19
Moreno Valley, CA | reply to Mountaineer1
Yes that is how I have it. |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
 ·AT&T Yahoo
| reply to Craigc540
The Linksys has an LAN IP of 192.168.1.1 and the Netgear has a LAN IP of 192.168.1.3,right?
And you set it up,as I showed earlier,with the two units connected LAN port to LAN port,WAN port NOT USED on the Netgear?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. |
|
Craigc540
join:2006-07-19
Moreno Valley, CA
| reply to Mountaineer1
Yes SSID broadcast is on with wep security. Ok I just got it to give out ip without my laptop having a static ip. I put in a static ip route on the netgear pointing to the Linksys at 192.168.1.1 which works put after I save the setting I can no longer get to the netgear setup page at 192.168.1.3 but the netgear is giving out ip's now. So I don't know if this is the right way to do it since I can no longer able to get to the netgear setup page. |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | reply to Craigc540
Is wireless SSID broadcast on? |
|
Craigc540
join:2006-07-19
Moreno Valley, CA | reply to Mountaineer1
So the problem is I have to have ports 1 to 1. |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
·AT&T Yahoo
| reply to Craigc540
LAN port 1 to LAN port 1
Example setup:
Linksys IP:192.168.1.1
Subnet Mask:255.255.255.0
DHCP Server:ON Range of:192.168.1.50 to 192.168.1.100
Netgear IP:192.168.1.3
Subnet Mask:255.255.255.0
DHCP Server:OFF
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. |
|
Craigc540
join:2006-07-19
Moreno Valley, CA
1 edit | reply to Mountaineer1
I have linksys in port #1 lan on netgear and lan #4 going to netgear.
Also I have linsys ip at 192.168.1.1 and netgear at 192.168.1.3 |
|
