Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » Netgear » WGT624 V3 connecting to Vonage router no DHCP help
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Netgear wg311v3 kills / freezes XP networking until reboot »
« netgear dg834  
AuthorAll Replies


Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
·AT&T Yahoo

reply to Craigc540
Re: WGT624 V3 connecting to Vonage router no DHCP help

LAN port 1 to LAN port 1

Example setup:

Linksys IP:192.168.1.1
Subnet Mask:255.255.255.0
DHCP Server:ON Range of:192.168.1.50 to 192.168.1.100

Netgear IP:192.168.1.3
Subnet Mask:255.255.255.0
DHCP Server:OFF
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift.

Craigc540

join:2006-07-19
Moreno Valley, CA
So the problem is I have to have ports 1 to 1.


Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
Is wireless SSID broadcast on?

Craigc540

join:2006-07-19
Moreno Valley, CA

Yes SSID broadcast is on with wep security. Ok I just got it to give out ip without my laptop having a static ip. I put in a static ip route on the netgear pointing to the Linksys at 192.168.1.1 which works put after I save the setting I can no longer get to the netgear setup page at 192.168.1.3 but the netgear is giving out ip's now. So I don't know if this is the right way to do it since I can no longer able to get to the netgear setup page.


Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
·AT&T Yahoo

The Linksys has an LAN IP of 192.168.1.1 and the Netgear has a LAN IP of 192.168.1.3,right?

And you set it up,as I showed earlier,with the two units connected LAN port to LAN port,WAN port NOT USED on the Netgear?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift.

Craigc540

join:2006-07-19
Moreno Valley, CA
Yes that is how I have it.


Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
Which Linksys Vonage router do you have,RT31P2 or PAP2(T)?

Craigc540

join:2006-07-19
Moreno Valley, CA
RT31P2


Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
According to the RT31P2 Manual,the default IP address is 192.168.15.1 . Did you change it to 192.168.1.1?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift.

Craigc540

join:2006-07-19
Moreno Valley, CA
Yes I did change it to be in the range of my network.


Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
Try to see if the PC will get an IP address automatically,with WEP turned off.
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift.
Forums » Equipment Support » Hardware By Brand » NetgearNetgear wg311v3 kills / freezes XP networking until reboot »
« netgear dg834  


Monday, 09-Nov 16:03:03 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [52] VoIP Over 3G Still Not Working For iPhone
· [28] Verizon Keeps Swinging At AT&T
· [26] Bill Would Force ISPs To Block Financial Scams
· [14] Mediacom Hints At 50, 100 Mbps Speeds
· [10] Clearwire To Get Another $1.5 Billion
· [8] 15 States Have Now Gotten Broadband Mapping Money
Most people now reading
· My cat is reluctant to exercise. [General Questions]
· Divorce advice... [General Questions]
· How in the world am I going to get into college? [General Questions]
· 60 Minutes piece on cyber security last night [Security]
· Google Has Acquired Gizmo5 [VOIP Tech Chat]
· A fishy CRTC tarriff filed by bell? [TekSavvy]
· Your ideal heroic 5-man class comp! [World of Warcraft]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Is Gear Score now the new requirement to get pug invite? [World of Warcraft]
· [ TV] Bell TV raising rates on January 1st 2010 [Bell Canada]