Craigc540
join:2006-07-19
Moreno Valley, CA
| reply to Mountaineer1
Re: WGT624 V3 connecting to Vonage router no DHCP help
Yes SSID broadcast is on with wep security. Ok I just got it to give out ip without my laptop having a static ip. I put in a static ip route on the netgear pointing to the Linksys at 192.168.1.1 which works put after I save the setting I can no longer get to the netgear setup page at 192.168.1.3 but the netgear is giving out ip's now. So I don't know if this is the right way to do it since I can no longer able to get to the netgear setup page. |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
 ·AT&T Yahoo
| The Linksys has an LAN IP of 192.168.1.1 and the Netgear has a LAN IP of 192.168.1.3,right?
And you set it up,as I showed earlier,with the two units connected LAN port to LAN port,WAN port NOT USED on the Netgear?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. |
|
Craigc540
join:2006-07-19
Moreno Valley, CA | Yes that is how I have it. |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | Which Linksys Vonage router do you have,RT31P2 or PAP2(T)? |
|
Craigc540
join:2006-07-19
Moreno Valley, CA | RT31P2 |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | According to the RT31P2 Manual,the default IP address is 192.168.15.1 . Did you change it to 192.168.1.1?
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. |
|
Craigc540
join:2006-07-19
Moreno Valley, CA | Yes I did change it to be in the range of my network. |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | Try to see if the PC will get an IP address automatically,with WEP turned off.
--
I'm just a Material Handling Tech.If it's too heavy,get a Forklift. |
|
