hfrisch
join:2007-02-13
Holmdel, NJ | reply to w8sdz
Re: [VoiceStick] BYOD configurations needed
That is a function of the PPC. Most were spec'd by the mobile carriers. Only "their" audio (CDMA or GSM originated) comes out of what you would consider the handset speaker. Anything else comes out the "PC" speaker. |
|
Granddaddy
Gramps
join:2003-09-24
Leesburg, FL
 ·Comcast
| reply to w8sdz
Re: [VoiceStick] BYOD configurations needed -AC-211 Posted
Here is what I used with my AC-211 SR to make it work with Voice Stick.
Just be sure to use your phone number and area code (mine is the 1352).
Be sure to save each change at the bottom of page and when you're complete....be sure to reset your AC-211. |
|
slickdoc
@verizon.net
| reply to suilobo
innomedia mta6328-2Re
Thanks to Hornhusker and pcf95 I was able to get my SR gizmo working. for some reason the sip proxy that worked was 206.165.50.116 with port 80. the user account is you phone number starting with 1. I was having problems placing a call until I changed the codec's to PCMU/8000 the first line and G729A/8000 for the second and none for the rest. Thanks everyone for your help |
|
navin2004
join:2006-05-14
Rocky Hill, CT | reply to hfrisch
Re: [VoiceStick] BYOD configurations needed
hfrisch,
Which model of WiFi phone were you able to setup VS with ?
I have been trying to setup my Nokia E70 phone, but no luck yet, keep getting a registeration failed message. |
|
hfrisch
join:2007-02-13
Holmdel, NJ | reply to w8sdz
I use a Utstarcom F3000. Before that, I used VS on an F1000 (the configurations are posted on one of the early pages in this topic). The Utstarcom GF210 also works fine, as does the Pirelli DP-L10 (both of those are WiFi/GSM dual mode). |
|
srinia
join:2007-07-29
| reply to w8sdz
Zoom2 | 
zoom |
I bought this at amazon
»www.amazon.com/gp/product/B000CO···-9134345
The set up was pretty easy after a few trial and error based on info in this thread.
This setting works for both incoming and outgoing calls through voicestick. |
|
yennyennyenn
join:2007-07-23
2 edits | reply to w8sdz
Hey guys,
I have two devices and got them set up with Voicestick
PAP2 upgraded to Sipura 3.1.8(SEc)
»www.voipconfig.com/voicestick_config.htm
Sunrocket AC 211-SR
»tygar.blogspot.com/2007/07/life-···ket.html
However my PAP2 is having issues with incoming calls. Meanwhile the AC 211-SR has no issues with incoming calls.
Any suggestions? |
|
voicest
@rr.com | reply to Granddaddy
Re: [VoiceStick] BYOD configurations needed -AC-211 Posted
Hi got the AC-211-SR working with voicestick but am unable to enable to caller id block ( *67). When I dial *67 it gives out a dial tone but when I deal any number I end up with a busy tone. |
|
jeffnyc
join:2004-06-09
New York, NY | reply to w8sdz
Re: [VoiceStick] BYOD configurations needed
Anyone else having issues with accessing voicemail? It ignores the press of the * key. |
|
sumdum
join:2006-02-18
usa
| said by jeffnyc  :Anyone else having issues with accessing voicemail? It ignores the press of the * key. have you tried 0000, it has been working since yesterday.
you have to enter your 11-digit mailbox number. |
|
jeffnyc
join:2004-06-09
New York, NY
| said by sumdum :said by jeffnyc :Anyone else having issues with accessing voicemail? It ignores the press of the * key. have you tried 0000, it has been working since yesterday. you have to enter your 11-digit mailbox number. 0000 still does not work from my phone... if i dial 00 it rings but it doesnt reach my voicemail |
|
sumdum
join:2006-02-18
usa | i use their MG-3 if that matters.
it listed in my call history as;
>>>8/11/2007 12:45:32 AM USA-Georgia 14040000000 |
|
jeffnyc
join:2004-06-09
New York, NY
2 edits | said by sumdum :i use their MG-3 if that matters. it listed in my call history as; >>>8/11/2007 12:45:32 AM USA-Georgia 14040000000 That actually works! The only issue is that I can only access it from my voicestick phone. (possibly if i use the bridge if i am not home - havent tried yet)
Anyone know how to alter the dialplan on the pap2t so that 00 or 0000 dials 14040000000 ?
I tried changing 311 to go to city of NY. This worked in my AC211 with SR but not in my pap2t with Voicestick
(>#|911|611|411|r(311)12126399675|00|0T|[2-9]xxxxxxxxx|1[2-9]xxxxxxxxx|[2-9]xxxxxxT|011[2-9]x.T|*x.T) |
|
Guest123
@pacbell.net | reply to w8sdz
Hello,
I am able to make outgoing / receive incomming call through Voicestick configured Innomedia adapeter But somehow not getting dial tone, Is any one can help me?
Appreciate it.
Thanks, |
|
hwittenb
join:2003-12-20
 ·Future Nine Corpor..
·callwithus
·Callcentric
1 edit | reply to jeffnyc
said by jeffnyc :Anyone know how to alter the dialplan on the pap2t so that 00 or 0000 dials 14040000000 ? Assuming the PAP2T is like the PAP2v1 then you would have couple of elements like this:
Skip the 01. part that is showing. I don't know how to get rid of it.
It's easy with just 00 but if you also can dial 0000 it is a little more complicated so that the 00 element doesn't preclude the 0000 element.
This is a good forum thread for Sipura dial plan basics:
»forum.voxilla.com/linksys-sipura···511.html |
|
kafka1
join:2002-04-23
New York, NY | thanks cornhusker.
my innomedia finally works with next to nothing.
if anyone figures out how to do 7 digit
or even 10 digit, please post. |
|
t00fan
join:2005-01-10
Cary, NC
| On innomedia, I havent found a way to change to 7 digit dialing with the dialplan. What I did was to change the PREFIX string.
Telnet into the Innomedia
> Ct
> 6
> 1ABC (Replace ABC with your area code)
> w
> q
R
This makes me able to dial local numbers with 7 digits.
Thanks, |
|
jeffnyc
join:2004-06-09
New York, NY
2 edits | reply to hwittenb
said by hwittenb :said by jeffnyc :Anyone know how to alter the dialplan on the pap2t so that 00 or 0000 dials 14040000000 ? Assuming the PAP2T is like the PAP2v1 then you would have couple of elements like this: Skip the 01. part that is showing. I don't know how to get rid of it. It's easy with just 00 but if you also can dial 0000 it is a little more complicated so that the 00 element doesn't preclude the 0000 element. This is a good forum thread for Sipura dial plan basics: » forum.voxilla.com/linksys-sipura···511.html Thanks. I just did this
and it worked. Actually prefer 00 to 0000 anyway - shorter.
Now if I could just figure out how to get my voicemail working from an outside line.... If I dial from an i2bridge enabled phone I can enter 0000 as the number and it will connect me to the voicemail system. |
|
jeffnyc
join:2004-06-09
New York, NY
1 edit | reply to w8sdz
Anyone know how to code the url to do an autologin to Voicemail acct? With Sunrocket I had:
|
|
Cornhusker
join:2005-10-26
Lincoln, NE | reply to kafka1
the 7-digital dial with VS worked (without any change in your gizmo) in past serveral days, with wrong billing. Now I can't use 7 digital again |
|
