rcilink
Premium
join:2003-12-15
Manchester, NH
| reply to radom11
Re: Getting a WRTp54G to take 3.1.17-NA...
loading the 3.1.17 (-NA) version on an old vonage box is an excellent choice, as it will remain unlocked..
when you click the "voice" tab, you should now be taken to a new voice section, with menus that look/feel identical to the Linksys PAP2 unit.
Look to the right of the web page, near top and find admin login and click that. Now you can configure Line 1 to your asterisk box and the other line if needed.
I do not suggest changing firmware again, as it is not needed.
Using 3.1.17, the new "Admin" account password is blank (just put username Admin with no password).
If you need help configuring SIP to your asterisk, look for help on Linksys pap2 and asterisk. |
|
radom11
join:2006-08-11
West Sayville, NY
| Rcilink,
Thank you for the fast reply.
The unit is displaying only version 3.1.17 it is not indicating NA should it be indicating NA?
I did not do the Hex changes as messages from celiomartins indicated that he did the changes and then put out the image, is that correct?
I located the Ast recipe page that talks about connecting the Linksys PAP2 I will attempt to do so when we have no more users on the pbx later this evening as they are using the Asterisk and I do not want to blow anything, in your reply you indicated that the code was like and feel of a PAP2 will it program the same way?
We will use line one for asterisk pbx to provide the remote animal shelters with home office pbx functionality to the small key systems that they no have in place at the remote locations, can you suggest a free voip incoming service that we can program into line 2 and a config for it?
What is the story with the 3.1.20 that I see is now out?
Your courtesy and help is greatly appreciated.
Many Thanks.
Radom11 |
|
GOUKGO
@fewpb.net | radom11, try this one...www.sipnumber.com
Don't know anything about them but they offer what your looking for, I think.
I've been lurking and have my box up and at about the same place you are...good luck. |
|
