Telcoguru
Premium
join:2005-08-22
Fresh Meadows, NY
| reply to EdLincoln
Re: [modem/router] Westell 6100 USB drivers for Macs
If you read the specs below it appears MAC usb installations are not supported. I think you need to fix you ethernet port if you want it to work.
4.1 Minimum System Requirements for 10/100 Base-T/Ethernet Installation
The following system specifications are required for optimum
performance of the Dual Connect NAT Router via
10/100 Base-T installation:
• Pentium® or equivalent and above class machines, Macintosh
• Microsoft® Windows® (98, 2000, ME, NT 4.0, or XP) or
Macintosh® OS X installed
• Computer Operating System CD-ROM on hand
• Internet Explorer 4.x or Netscape Navigator 4.x or higher
• 64 MB RAM (128 MB recommended)
• 10 MB of free hard drive space
• TCP/IP Protocol stack installed
• 10/100 Base-T Network Interface Card (NIC)
4.2 Minimum System Requirements for USB Installation
The following system specifications are required for optimum performance of the Dual Connect NAT Router via
USB installation:
• Pentium® or equivalent and above class machines
• Microsoft® Windows® 98, 2000, ME, or XP installed
• Computer Operating System CD-ROM on hand
• Internet Explorer 4.x or Netscape Navigator 4.x or higher
• 64 MB RAM (128 MB recommended)
• 10 MB of free hard drive space
• TCP/IP Protocol stack installed
• USB Version 1.0 or higher compliant bus
• An available USB Port |
