nycdave
Premium,MVM
join:1999-11-16
Melville, NY
 ·Verizon FIOS
| reply to rmrper
Re: How-to: make ActionTec MI424-WR a network bridge
said by rmrper  :nycdave, are you saying the new 612 cannot have ethernet just for data, and coax only for tv? Meaning, if my normal ONT died and I was given a 612 to replace it, I'd be forced to use coax only since I have TV service? If so, that's a major strike against FIOS in my opinion. I have the Actiontec just as a switch with my WRT54G in front right now. The Actiontec will not play nice with ATT CallVantage, and I had issues getting my Xbox 360 to work as well. I would hate to be forced to use the Actiontec as the primary router, so much so that I would consider dropping TV service if it meant I could keep Ethernet to the ONT. No, that is not what I am saying. I am trying to explain that the 612 is designed for more flexibility. If a customer only has existing coax, then FiOS data can be sent through the coax along with FiOS TV (CAT5 would not have to be run). If CAT5 is already present, then FiOS data can be sent through the ethernet jack on the ONT (and FiOS TV would still use the coax). But, the ONT's MoCA and the ONT's ethernet cannot be used at the same time to send data to the router. The ONT only supports 1 WAN data 'path' at a time. If a customer wants to use their own router, then the ethernet output would have to be used on the 612. If that customer also has FiOS TV, the video is still using the coax (but the MoCA LAN network would have to be generated either by the Actiontec, or a Moto NIM100 inside the home). |
