Daniel
Premium,MVM
join:2000-06-26
Pleasanton, CA
clubs: 
2 edits | reply to nwrickert
Re: Is Portknocking "Real" Security?
Moreover, it would work behind a NAT router, where I would only have to forward that one udp port instead of all of the ports that would be needed for port knocking.
Holy God. You mean you've been arguing all this time against it and you don't even know how it works?
Portknocking only opens ONE (1) port, e.g. 22 for SSH.
»www.portknocking.org/
One source address, one port, for a short amount of time. And what you're talking about is called SPA, and it was mentioned earlier in the thread. I agree that it's an interesting alternative to the portknocking implementation, but ultimately it's pretty much the same.
The firewall is closed, but when the trusted client sends a secret stimuli the firewall opens up JUST FOR THEM -- keeping the rest of the world locked out. This is the same for both portknocking and SPA.
But dude...do you see now?
--
dmiessler.com -- grep understanding knowledge |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
 ·AT&T U-Verse
 ·AT&T Midwest
| said by Daniel  :Holy God. You mean you've been arguing all this time against it and you don't even know how it works? Portknocking only opens ONE (1) port, e.g. 22 for SSH. If you could avoid these unwarranted insults, perhaps intelligent discussion might break out.
--
AT&T dsl; Westell 2200 modem/router; SuSE 10.1; firefox 1.5.0.10 |
|
Daniel
Premium,MVM
join:2000-06-26
Pleasanton, CA
clubs: | Fair enough, my bad. I got a bit rowdy.
So, yeah...it's just one port, man. Does this change anything for you?
--
dmiessler.com -- grep understanding knowledge |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
·AT&T U-Verse
·AT&T Midwest
1 edit | So, yeah...it's just one port, man. Does this change anything for you? According to the doc "encoded in the form of connection attempts to closed ports, in which the port sequence forms the encoding,". You can't have much of a port sequence with only one port. In other words, it isn't going to work too well when you are behind an external firewall/router.
So sure, you add a security layer of some sort. But I have to remove an existing security layer (the external firewall), to be able to use it. In that case, when you are behind a typical NAT box, it may be a net loss in security.
--
AT&T dsl; Westell 2200 modem/router; SuSE 10.1; firefox 1.5.0.10 |
|
TheWiseGuy
Dog And Butterfly
Premium,MVM
join:2002-07-04
Yonkers, NY
1 edit | Does this help?
»www.portknocking.org/view/about/requirements
Edit:
Assuming you want to run the server on a specific IP and do not need to dynamically select the IP, you should be able to forward the port (you would need to anyway) to the firewalled server and then read the logs as they come into that server. So I assume
whose rules can be dynamically modified.
is not absolutely needed for the router. I believe it needs to be able to log via syslog. |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
·AT&T U-Verse
·AT&T Midwest
| Does this help? From the linked reference, "Any *NIX host running IPCHAINS/IPTABLES is suitable."
However, most inexpensive broadband routers are not suitable. So this is mostly a geek technique, particularly for those enthralled by the gee-whiz nature of the methodology.
--
AT&T dsl; Westell 2200 modem/router; SuSE 10.1; firefox 1.5.0.10 |
|
TheWiseGuy
Dog And Butterfly
Premium,MVM
join:2002-07-04
Yonkers, NY
| Not really, again if the router can log packets via syslog to the server machine, all you need to do is forward the Port to the firewalled server. The server then opens or closes its own port.
--
Warning, If you post nonsense and use misinformation and are here to argue based on those methods, you will be put on ignore. |
|
Daniel
Premium,MVM
join:2000-06-26
Pleasanton, CA
clubs:
1 edit | reply to nwrickert
However, most inexpensive broadband routers are not suitable. So this is mostly a geek technique, particularly for those enthralled by the gee-whiz nature of the methodology.
Ah, now I see where you're coming from. So if a security layer doesn't work on "inexpensive broadband routers" then it's essentially a toy technology? I think this illustrates why you're completely disjointed from those who are in support of this technology as a layer: you're thinking of things from a home/SOHO standpoint, and we're coming at it from a corporate perspective.
No offense to you, but this has largely been an enterprise discussion all along, so busting out now with "this doesn't work on my Linksys" isn't really a strong argument.
At any rate, can we agree that for corporate situations (where they're not likely to be using broadband routers) this is a decent layer? If so then I'll definitely agree that it might be overkill for the average home setup. 
--
dmiessler.com -- grep understanding knowledge |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL | So if a security layer doesn't work on "inexpensive broadband routers" then it's essentially a toy technology? I never said that.
--
AT&T dsl; Westell 2200 modem/router; SuSE 10.1; firefox 1.5.0.10 |
|
Daniel
Premium,MVM
join:2000-06-26
Pleasanton, CA
clubs:
| said by nwrickert :However, most inexpensive broadband routers are not suitable. So this is mostly a geek technique, particularly for those enthralled by the gee-whiz nature of the methodology.
--
dmiessler.com -- grep understanding knowledge |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
·AT&T U-Verse
·AT&T Midwest
| Industrial CISCO routers are not using IP tables either. And if the firewall were running on CISCO equipment at our work, there is no way our servers would be given access to the firewall logs on those routers.
I provided an example with the broadband routers. I didn't say that's the only example.
I used broadband routers as my example, because I had already commented on them earlier in an earlier post. What you wrote in response to that earlier post was wrong and insulting.
--
AT&T dsl; Westell 2200 modem/router; SuSE 10.1; firefox 1.5.0.10 |
|
