| reply to welie
Re: Innomedia Gizmo bricked? Try this! said by welie:Where do you get the information for step 13? Authentication ID and password? If you are porting from viatalk, this info will be provided by them. Otherwise, it will be provided by whoever you port to |
|
| Instructions worked like a charm on my Inno. I signed up for VT. Hopefully the number port will go through soon so I can get a home phone working again. Even though I can access the Inno, I am getting their ATA. Is it possible to move to the Inno later if I so desire? |
|
|
|
| said by bodsford :
Instructions worked like a charm on my Inno. I signed up for VT. Hopefully the number port will go through soon so I can get a home phone working again. Even though I can access the Inno, I am getting their ATA. Is it possible to move to the Inno later if I so desire?
glad i could help  |
|
| reply to walletless
said by walletless :said by welie:Where do you get the information for step 13? Authentication ID and password? If you are porting from viatalk, this info will be provided by them. Otherwise, it will be provided by whoever you port to For Authentication ID, I just made up a 12 digit number and put it in there, for password, I just made up a 24 digit number and put it in there. I received a VoIP light and am still using SunRocket until I can get another provider. |
|
| reply to walletless
How to set up Innomedia for BroadvoiceI have a VoIP line from BroadVoice which I use for business when I work from home. I did order new service (and a new ATA) from VT. In the mean time, I used my SunRocket Innomedia MTA 6328-2Re ATA to hook my house phones to my business line. That way, at least my family can make outgoing calls from the house phone.
Here's how I did it:
- Set the SIP Proxy values:
SIP Proxy: proxy.chi.broadvoice.com
Use Outbound Proxy: Yes
SIP Local Signalling Port: 5060
Registration Expiration Time: 3600
Preferred CODECs List:
PCMU/8000
PCMA/8000
G729A/8000
G726-32/8000
- Save
- Set User Account values as follows:
Line No. 1
User ID: <my 10-digit phone number>
User Password: <my password from Broadvoice>
Confirm Password: <my password from Broadvoice>
User Name: <my 10-digit phone number>
Authentication ID: <my 10-digit phone number>
Use Hot Phone Number: No
Hot Phone Number:
Enable T38 FAX: No
- Save
- Management > Reboot
Notes:
- proxy-chi.broadvoice.com does not work, you have to use a dot after proxy, not a hyphen.
- The "chi" part of the proxy server is variable depending on your location.
- Probably the PCMU codec alone would be fine.
Good luck! |
|
| reply to Darin
Re: Innomedia Gizmo bricked? Try this! Well, I tried this (entering made-up ID/Password), and I can't get my SunRocket number to work...Can anybody help?
Thanks,
Mike |
|
