eosirl2
join:2007-07-24
Provo, UT
| reply to chpalmer
Re: [Equipment] Can not login at 192.168.15.100
I did restarts but no access
I would have thought I should too, but it appears for some reason as if there are two separate lands, even though the subnet mask is 225.225.225.0 on all routers and computers. The MTU on routers and computer NIC is 1400 as per ISP instructions. Tested fragment packets as per dslreports and 1400 is my magic number.
It seems to me, the if I had complete access to the router instead of limited it would solves most of the issues.
Oh well I wait on baited breath for a response from Vonage and see if it is willing to remedy the situation. |
|
chpalmer
join:2002-11-18
Belfair, WA
 ·wavebroadband
 ·VOIPo
1 edit | reply to chpalmer
Also- you can go to admin settings of the RPT300 and enable Remote Administration.Then put it back behind the wireless router. Then access it using the format 192.168.1.xxx:8080
Its possible you will have to configure your wireless router then to allow the voice section of the RPT300 to work properly. |
|
chpalmer
join:2002-11-18
Belfair, WA | reply to eosirl2
Try restarting the wireless router and computer.
You should have internet access with the way its set up.
How is your computers tcp settings configured? |
|
