vz tech 2
join:2005-11-19
Richmond, VA
| Re: XBOX 360 and FiOs(Actiontec M1424WR) Are you sure that you are entering WEP and not another form of encryption? Also recheck your numbers there is an issue with the 0 looking like o's and the B's looking like 8 on the sticker of the actiontec router also turn off the wep for a min and try to connect, if it does then some number or character or form of wep is not quite right | |
|
 
AocLokk
@verizon.net | Re: XBOX 360 and FiOs(Actiontec M1424WR) No luck on the turning off the WEP  | |
|
 | stonecoldohy
join:2001-11-22
New York, NY | Re: XBOX 360 and FiOs(Actiontec M1424WR) When I connected my Xbox360 to the Actiontec I gave my Xbox an IP address outside of the range the Actiontec will assign. | |
|
| |
AocLokk
@verizon.net | Re: XBOX 360 and FiOs(Actiontec M1424WR) What might that be?
And when i assign it do i have to assign the subnet mask and gateway as well? | |
|
| | | 
xNBKxZ3r0
join:2007-09-08
Phoenix, AZ
clubs:
 ·Time Warner Cable
| Re: XBOX 360 and FiOs(Actiontec M1424WR) With my 360 I connect wired and wireless my computer. I don't suggest using wireless for online gaming as you do have a little delay in data transmission. Once you're playing online there is enough lagg going on during game play sometimes that you don't want to contribute to it or experience it yourself. | |
|
| |
AocLokk
@verizon.net | What is outside the range?
And when i assign it do i have to assign the subnet mask and gateway as well? | |
|
| | | stonecoldohy
join:2001-11-22
New York, NY
| Re: XBOX 360 and FiOs(Actiontec M1424WR) You need to look in the router and see what it is assigning through DHCP, mine was 192.168.1.2-192.168.1.255. I changed the top of the range to 192.168.1.55 and gave my Xbox the IP of 192.168.1.66. The gateway I believe became 192.168.1.1 and the subnet didn't change. | |
|
splicingdan
join:2005-10-13
Staten Island, NY
| said by vz tech 2  :Are you sure that you are entering WEP and not another form of encryption? Also recheck your numbers there is an issue with the 0 looking like o's and the B's looking like 8 on the sticker of the actiontec router also turn off the wep for a min and try to connect, if it does then some number or character or form of wep is not quite right There aren't any "o's". The WEP key is hexadecimal (0 to 9, a to f). | |
|
| vz tech 2
join:2005-11-19
Richmond, VA
| Re: XBOX 360 and FiOs(Actiontec M1424WR) Yeah I know that it is in hex and that it is 0 thru 9 and A thru F but I was just saying that some people have inputed o's in sted of 0's not eveyone knows hex, and the fact that on some of the tags the B's and 8 look similar, thanks splicingdan for the refresher | |
|
|
|
|
