jbibe
Premium,MVM
join:2001-02-22
| reply to Guspaz
Re: Vista - WPA2 Enterprise - wont retain username/password
I would delete the wireless profile, reboot the computer, and then re-enter all of the profile information.
I don't have a computer running Vista at the present time. I ran several tests 9-10 months ago using Vista RC1 with a FreeRADIUS server setup for PEAP authentication. I did not have to enter my username and password every time I connected to the access point. My memory is that the "Cache ..." control should be enabled for the computer to remember the username/password information, but I might be wrong. |
|
Guspaz
Guspaz
Premium,MVM
join:2001-11-05
Montreal, QC
 ·Colbanet
| The problem with the cache is that it's invalid as soon as you move to a different access point on the same network, which prevents your computer from connecting at all unless you disable the cache. This is a problem when moving around campus during the day. What I really need is to be able to simply have Vista remember the password; it doens't have any place to enter the login credentials before connecting. It does the old "Additional information is required to connect to this network" (or whatever) balloon popup.
--
SuprFile, super simple free image hosting: »suprfile.com |
|
jbibe
Premium,MVM
join:2001-02-22
2 edits | You can set up a wireless profile manually.
1. Right click the wireless icon in the tray, and select "Connect to a network"
2. Select "Set up a connection or network" near the bottom of the dialog box
3. Select "Manually connect to a wireless network" option in the dialog box
4. Enter the information for the wireless network you want to add
5. Click Next
6. Select "Change connection setting"
7. Enter the remaining connection and security information |
|
Guspaz
Guspaz
Premium,MVM
join:2001-11-05
Montreal, QC
·Colbanet
| I have a wireless profile (and creating a new one manually didn't help).
When I select 802.1x for the security (since it's PEAP), there is no other provision to enter security-related information, save for going into the properties of the profile afterwards and selecting additional required options, like what server to auth to and what certificate to use.
--
SuprFile, super simple free image hosting: »suprfile.com |
|
jbibe
Premium,MVM
join:2001-02-22
4 edits | Although your comments about setting up PEAP does not match my memory and notes, I assume that you are correct. Perhaps someone running Vista will show up and help. |
|
jbibe
Premium,MVM
join:2001-02-22
| reply to Guspaz
said by Guspaz  :When I select 802.1x for the security (since it's PEAP), there is no other provision to enter security-related information, save for going into the properties of the profile afterwards and selecting additional required options, like what server to auth to and what certificate to use. I just reread your post. You should not select 802.1x. 802.1x is used for dynamic WEP. The correct selection is WPA-Enterprise, or WPA2-Enterprise. |
|
Guspaz
Guspaz
Premium,MVM
join:2001-11-05
Montreal, QC
·Colbanet
| The school doesn't use WPA. They use WEP 802.1x and PEAP for auth.
My point is that while the OP was using WPA2 Enterprise, it's the same issue I'm having.
--
SuprFile, super simple free image hosting: »suprfile.com |
|
OnHeL
Angel
Premium
join:2000-09-11
Jamaica, NY
 ·RoadRunner Cable
2 edits | Seems Guspaz there is no way to avoid entering your credentials every time. I finally got fed up and I stopped using PEAP on my Vista client and swiched to TTLS using SecureW2 and its working great now. PEAP and Vista just doesnt work properly and I'm still waiting for Juniper to kick out a Vista compatible Odyssey Access Client so I can make use of PEAP again, or if Microsoft should kick out a patch but I wont hold my breath. |
|
