Bicephale
join:2005-09-24
 ·TekSavvy Solutions..
| Re: DSL setup questionHi Jo,
I thought nobody would be curious enough to ask...
Here's what i'd suggest you try, this should work:
Home > Toolbox > Remote Assistance
1st enable Remote Assistance! If it's unavailable
then you might have to return to factory settings:
Home > SpeedTouch > Configuration > Reset
Take notes while on the Remote Assistance page and
type these few TelNet CLI commands, starting with:
Being "Pingable" is probably required but i didn't
attempt to verify it, though i testify that what's
next is absolutely mandatory so don't forget this:
Now, if the Remote Assistance page is available it
means that the TelNet CLI would also be accessible
but i don't use an external router so i leave this
matter for others to clear out. Remember that the
GUI is sercure (HTTPS) but TelNet isn't and that's
why the default duration is set to twenty minutes.
 |
