Bicephale
join:2005-09-24 | reply to cheetah334
Re: SpeedTouch 516 Tweaking :)
Less UpStream speed would improve the DownStream SNR Margin slightly. |
|
cheetah334
join:2004-07-19
East York, ON
| sounds good, but how do i do that, i'm using the firmware v6.2.17.5... and can't see any options... |
|
TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada | cheetah334> you seem to have some noise on your line...
Check all filteres, dial a number on your phone and listen if you hear any noise. check physical setup. |
|
tanit
join:2008-01-10
| reply to Bicephale
Help me.
This is after upgrade from 5.3 -> 6.1
Is is okie?
Because SRNM before upgrade is : about 9.5-13.5 |
|
TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada
| 6.1.0.5 is the worse of the lot..
adsl2+ with that sync and power of 20.5
whos your provider?
Get the 6.2 UK firmware.
»www.thomson-broadband.co.uk/code···.asp?c=7
Upload SNR.
Check your physical setup. everything filtered? alarms, faxes satelites? etc? |
|
Bicephale
join:2005-09-24
 ·TekSavvy Solutions..
2 edits | reply to tanit
STMT - RCV, 24 hours CRC-Errors Curve feature |
Really, with those RCO, Attenuation and SNR Margin
figures, euh... Oh, and the flatness in the shape
of your envelope, euh... You should have no issue
and yet the UpStream bandwidth speed appears to be
too high or the wiring is causing quite an obscure
problem. I regret that the "UpTime" of your 'DMT'
sample makes it almost useless in terms of errors,
i'll use it but this may lead to innaccuraties!...
We can estimate your "Transmitted CRC" error level
to be of 2562/day or so. This is catastrophic for
someone who has an Interleaved profile, i believe;
it's the worst part because i don't know what kind
of failure will cause such an UpStream BottleNeck!
Usually, it's the upper bandwidth that's affected.
Perhaps it's a strong local A.M. radio station, in
that case you can try centralized filtering before
anything else in order to limit the antenna effect
of your wiring. Then, i'd strongly suggest to put
a Toroïdal Ferrite choke on the power supply lead,
near the MoDem. 3rd but not least, shielding with
ferro-magnetic materials does help but it would be
an option only to one who resides in his own home.
Please, try to get a reasonable CRC Error curve by
using 'STMT' in order to obtain one that's similar
to what you'd get from a SpeedStream 4200 D240 and
'DMT v9.01'. A few static numbers hardly suffice.
Try them all if FirmWare v7.4.1.7.0 won't work but
i recommend starting with the v5 ones 1st since it
provides additional features when used with 'DMT'.
It's an opportunity to remind our readers that the
author of 'STMT', BoxFan, added the 24 h CRC Error
feature on my request. This was meant to help the
SpeedTouch owners by allowing them to obtain a CRC
Error record from their Thomson device and yet not
even one single post has ever shown such a capture
since the release of 'STMT v0.7.2' six months ago!
Common people, the least you can do is to use this
tool. It's still a young project and there may be
bugs but, if you're able to collect real "dynamic"
statistics under the form of CRC Error curves, i'm
suggesting it's about time to give BoxFan FeedBack
that he has owned by working continuously for you!
Just follow the links or is it too much to click!?
Other Useful Links:
Phone jack Wires Question, Bicephale, 2008-Jan-11
A wire is a wire is a wire, Bicephale, 2007-Sep-6
The customer's own wiring, Bicephale, 2007-Jun-13
The SpeedTouch "BootP Reset" recovery procedure, Bicephale, 2007-Jun-9 <-- 'TFTPD32'
Perhaps i should include 'OrbMT Modem Tool v3.18':
OrbMT Modem Tool, Bicephale, 2007-Jul-24
And then a few more links about Remote Assistance:
SpeedTouch 516 Tweaking :), Bicephale, 2007-Sep-30
SpeedTouch 516 Tweaking :), Bicephale, 2007-Oct-6
DSL setup question, Bicephale, 2007-Oct-7
Dialup ?, Bicephale, 2007-Jul-13 |
|
tanit
join:2008-01-10
| reply to TilhasBB
Thanks TilhasBB,
I DID NOT remember what the first Version of my Speedtouch.
1. "6.1.0.5 is the worse of the lot.."
-> You mean : this version is bad?
2. "Get the 6.2 UK firmware"
--> As the DMT information, I think My Speedtouch is :
516V5 (BANT-J), and
Software Variant : AA
So I have tried to install 6.2UK (for 516V6 only), but could NOT upgrade.
3."Check your physical setup. everything filtered? alarms, faxes satellite "
- DONE. And my ADSL line is a new private line; direct from the ISP to my Router. |
|
TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada | Ahhh you have the V5 so its different firmwares for you.
Try 5.4 one wait 24hours to test it out see how many errors and how stable it is.
Then try the 6.1 and keep best of the two. |
|
tanit
join:2008-01-10
| 
Version 5.4 Now |  | 
Version 6.1.0.5AA | 
Version 6.1.4.7UK |
This is all my tried   , A busy week with Speedtouch Firmware and DMT.
I'm still dont know why my RCO is too low (18%).
And What should I DO now?
Thanks all. |
|
TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada
| here's the way it works.
Your line can do 22783kbps but your line card at the central office says he's only paying for 4101.
So only 4101 of the 22783 is used = 18% Which is good which means your line has a lot of room and should have any errors.
Your on an ADSL2+ Card.
Your line is phenomenal but your getting errors on your upload side.
What i recommend you do. Is try each firmware for 24hours and look at the number of errors. the one with the least amount use it.
If your not having any sync issues and its stable leave it as is 
Have a good night |
|
DKS
Damn Kidney Stones
Premium,ExMod 2002
join:2001-03-22
Owen Sound, ON
clubs: | reply to tanit
Who is your telco provider and your ISP? |
|
