Beginning with 7.x you can configure hairpinning on the ASA or PIX. 7.x does not run on the 501 or 506e.
The command "same-security-traffic" will allow you to do what you want, so if you can get an upgrade to an ASA you should be all set. Here are a couple hairpinning examples:
Beginning with 7.x you can configure hairpinning on the ASA or PIX. 7.x does not run on the 501 or 506e.
The command "same-security-traffic" will allow you to do what you want, so if you can get an upgrade to an ASA you should be all set. Here are a couple hairpinning examples:
reply to garnetbobcat I actually found another PIX 501. I will establish the tunnels on it and will use old one for dial-in access. Tested it today and it worked fine. -- The best thing about piracy is the music in the keygens.
