scarface199
@qwest.net
| reply to Tehrasha
Re: New firmware out for Actiontec GT701-WG
I am using PPPoA and i upgraded to the new firmware.. and to me it seems to be working really well... I was having lost connection problems for atleast 2 months.. now that i upgraded the firmware it stays connected now..  |
|
smithduluth
join:2006-10-26
Duluth, MN | reply to wd4075
I noticed that you now get a record of the number of re-trains, which may be good information if you are having connection problems. |
|
wingman99
join:2003-12-18
Bettendorf, IA
1 edit | reply to Tehrasha
I like PPPoA better to however you can select it with the new firmware |
|
Tehrasha
join:2004-12-15
Vinton, IA
| reply to wd4075
Drat... I was hoping in vain for SNMP. 
I dont know if what I see periodically is this 'modem lockup' or not. Periodically I am unable to open new connections to the internet. Established connections and streams keep going fine, but new connection attempts fail. It seems to be usage dependent, and sometimes takes weeks or even months to fail out. Reboot always cures the problem.
Otherwise, since I am using PPPoA, I might as well keep the old QW03 that I'm running now. |
|
wd4075
join:2004-06-21
Nampa, ID
| reply to Tehrasha
Probably the same as the GT701R firmware.
Changes:
-PPPoE by default
-Configuring Quick Setup GUI will now set PPPoE
-Advanced Setup GUI has been revised to default to PPPoE
-Auto detect has been disabled
-PPP User Name/Password: saved when switching from PPPoA to PPPoE or vice
versa
Fixes:
-Modem Lock-Up
-Domain Name Broadcasting disabled
-Remote Management with Unnumbered Mode set
-Total Bytes Sent and Received on WAN Interface
--
Visit »www.spazmatic.net for more DSL information. |
|
