gdm
Premium,MVM
join:2001-06-15
Mchenry, IL
clubs:
 ·AT&T U-Verse
 ·AT&T CallVantage
·Comcast Digital Vo..
 ·Comcast
|  Varying Stats
Has anyone noticed the Max rate varies? I have checked and seen it be 65xxx, 64xxx and 62xxx. The RG has never reset during this time it's just the Max rate differs.
DSL Down Up
Current Rate: 25216 kbs 2048 kbs
Max Rate: 63796 kbs Not Available
Current Connection:
Current Noise Margin: 26.5 dB Not Available
Current Attenuation: 21.3 dB Not Available
Current Output Power: 13.7 dBm -13.6 dBm
IP Bytes Packets Errors %
Transmit: 445266482 774385 0 0
Receive: 12014094990 9369458 1 0 |
|
sabre18
join:2008-03-14
Dublin, CA
|  DSL Down Up
Current Rate: 25216 kbs 2048 kbs
Max Rate: 30508 kbs Not Available
Current Connection:
Current Noise Margin: 12.0 dB Not Available
Current Attenuation: 28.1 dB Not Available
Current Output Power: 12.5 dBm 2.3 dBm
IP Bytes Packets Errors %
Transmit: 21888875 74964 0 0
Receive: 3935356869 2863302 1 0
I've had tech's out to my house 3 times so far. The latest one moved my port in the V-RAD. Now I'm getting close to 10mg on my download speeds, but my upload has dropped to .5mb. I'm hoping that at least my tv's will stop locking up and my dsl will stop dropping. |
|
gdm
Premium,MVM
join:2001-06-15
Mchenry, IL
clubs: | If VDSL stats are similar to ADSL stats. Your Noise Margin is ok but should be higher.
Did the tech tell you how far you are from the VRAD? Your MAX Sync is half mine. I am 2024' away from the VRAD> |
|
sabre18
join:2008-03-14
Dublin, CA
| reply to gdm
He tells me I am running at about 2,500' from the VRAD on his test EQ. I know the loop length is supposed to be about 2,137' per cable records. I told him and the tier 2 tech support people this, but they keep ignoring it. I also informed them I am an engineer with the company and my peer pulled up my cable makeup and footage. I figured they haven't tried moving my service to a new port yet so I'd give them a chance at that before demanding they send out a cable repair tech to find the resistance points on my cable facilities. At the moment, everything is running a TON better than before. this is how it looks now after a couple of hours. |
|
sabre18
join:2008-03-14
Dublin, CA
| reply to gdm
DSL Down Up
Current Rate: 25216 kbs 2048 kbs
Max Rate: 30840 kbs Not Available
Current Connection:
Current Noise Margin: 12.5 dB Not Available
Current Attenuation: 28.1 dB Not Available
Current Output Power: 12.5 dBm 2.3 dBm
IP Bytes Packets Errors %
Transmit: 29369890 121039 0 0
Receive: 7586737048 5533512 1 0 |
|
sabre18
join:2008-03-14
Dublin, CA | reply to gdm
Have accessed your 2wire MDC page? I keep looking in there since it give more information and much better histories. |
|
en102
Canadian, eh?
join:2001-01-26
Valencia, CA
·RoadRunner Cable
 ·DSL EXTREME
| reply to gdm
said by gdm  :Has anyone noticed the Max rate varies? I have checked and seen it be 65xxx, 64xxx and 62xxx. The RG has never reset during this time it's just the Max rate differs. Similar to ADSL, the 'max rate' will change based on line stats
eg.
My max rate varies from ~6100 to 7100kbps, along with my noise margin. My attenuation varies a little (~0.5db) as does output power.
Sad thing is that AT&T will only qualify me for 'Express' even though I've been on 'Pro' for +3 years.
--
Canada = Hollywood North |
|
gdm
Premium,MVM
join:2001-06-15
Mchenry, IL
clubs:
·AT&T U-Verse
·AT&T CallVantage
·Comcast Digital Vo..
·Comcast
| reply to sabre18
If you are still having issues try posting in ATT Direct forums.
Honestly to me your sync rate should be in the mid 40's or higher. This is the link to the MDC »192.168.1.254/xslt?PAGE=J05_BB_C···ASS=dsl0 |
|
Shadow01
Premium
join:2003-10-24
Wasteland
·AT&T Midwest
| reply to sabre18
said by sabre18 :He tells me I am running at about 2,500' from the VRAD on his test EQ. I know the loop length is supposed to be about 2,137' per cable records. I told him and the tier 2 tech support people this, but they keep ignoring it. Field footage is field footage. I think it is best that the records reflect what is in the field, not the other way round. The only way I know to make the field match what is on the records is to drag the house closer to the VRAD. 400ft difference between records and the field is minimal. That is less that a half a block of cable.
Based on the rest of the stats, I would say the a port change may be the next step. I would post is Direct as gdm said and see if they can help. |
|
