aeroplan
join:2006-04-11
Saint-Laurent, QC
| [Unlock] Need help with VTA-CV
Hi guys!
I used cyt46 to unlock my VTA-CV and then upgraded firmware to 1.08 NA
I have this on the login page:
VTA-11.4.0-r060331-1.00.08-r061127.img
Boot loader is : 1.3.8.1602
I still cannot change settings.
I can login with Admin/Admin or Support/user or user/user, but I still don't have the Save&Reboot button at the Admin tab (I only have, on the left side of the page, the Provision, VoIP and Logout buttons, no Save&Reboot).
In fact, even after logging in with Admin/Admin, the page looks identical like when logging with user/user.
So I cannot save the changes I make at Admin/VoIP/Line1. I click Apply but it won't remember the changes.
Could someone give me an advice on this? Pls! |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA | Try to perform a factory reset to see if you can rsolve the issue. |
|
aeroplan
join:2006-04-11
Saint-Laurent, QC
| Guys, I tried everything I know with this adaptor.
It shows now always the 1.08 bin, even after trying to upload the NA2a bin.
I did what I thaught to be a factory reset : I pushed the Reset button on the back with a pin, then turned off power while still pushing, then powered the unit up again. The LEDs didn't flash, I don't know if this the correct way to do it.
I also tried to do a "soft" factory reset at the Support tab in the webpage.
Nothing helps!!!
I still don't have the Save&Reset button and I cannot load my custom settings.
I'm very frustrated with this, as I cannot use my vBuzzer account to receive calls.
I can assure you that I spent hours and hours reading this forum and others, but I'm not very familiar with this matter and that is why I'm asking such stupid things, like how to do a factory reset!...
Please help! |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| Do you have other v3.3 embedded device, i.e. some WiFi router, that you have an access through its shell? If you do, you can use this device's serial port to hook it to your VTA-VR serial port and flash it with the firmware you want. Otherwise, you will need to get a USB/Serial-console cable to do this. |
|
aeroplan
join:2006-04-11
Saint-Laurent, QC
| Well, I wish I could understand exactly what you're saying...
I have an US Robotics 8045 wireless router, if this is what you mean.
I re-read all the topic "DLink VTA-VR", but I still don't understand what kind of serial port you mean.
Do I have to use a special cable, which connects some ports (serial) found on each device's motherboard? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by aeroplan  :Well, I wish I could understand exactly what you're saying... The idea is to use the device as your serial-console interface to access the serial port on your VTA-VR.
I have an US Robotics 8045 wireless router, if this is what you mean. Can this run OpenWRT firmware? If so, then you can compile OpenWRT to include with a minicom package to use as a serial-console interface to your VTA-VR.
I re-read all the topic "DLink VTA-VR", but I still don't understand what kind of serial port you mean. If you don't understand, please refrain yourself from doing this.
Do I have to use a special cable, which connects some ports (serial) found on each device's motherboard? With my suggestion using an embedded system that already comes with a 3.3v serial port, you just need straight wires; Otherwise, you will need to build your own serial-console cable.
--
Mazilo always prays for FREEBIES!
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574
|
|
Teksavvy1
join:2008-03-29
| reply to aeroplan
DLINK VTA CV
Do you have any details for the process ? I have gotten it unlocked at 1.07, however looking for details for the download of the xml file and then RC4 ... after that the directions for the editing of the xml file with pongage.
Most of what I have read is patchie.. not step by step. I need the direction for the http download of the xml to go to the next step ?
cheers
email me and maybe ...you or I can call each other?
gumgone*@*g*mail*.*com |
|
