hussle87
Premium
join:2008-01-06
Sykesville, MD
| what is this on a telephone pole
it looks like a steel can. |
|
LazMan
join:2003-03-26
Angus, ON | Looks like a T1 repeater housing... Sometimes called an "AP-CAN" or Application-Can... Holds HDSL repeater cards for T1s...
Laz |
|
DaMaGeINC
The Lan Man
Premium
join:2002-06-08
Greenville, SC
clubs: | reply to hussle87
t1 repeater |
|
Splitpair
Premium
join:2000-07-29
Cow Towne | reply to hussle87
That is a four slot pressurized HDSLx doubler housing. Probably made by Charles Industries.
Wayne
--
If you cannot fix it with a buttset and some bennies you ain't a technician.
|
|
Splitpair
Premium
join:2000-07-29
Cow Towne
 ·T-Mobile US
| reply to LazMan
said by LazMan  :Looks like a T1 repeater housing... Sometimes called an "AP-CAN" or Application-Can... Holds HDSL repeater cards for T1s... Laz Doublers not repeaters my friend a repeater housing is squareish and holds 6 or 12 slots this has 4 standard 400 mechanics slots and holds 4 HDSLx or HDSL4 doublers.
Wayne
--
If you cannot fix it with a buttset and some bennies you ain't a technician.
|
|
LazMan
join:2003-03-26
Angus, ON | When it comes to OSP, I'll gladly accept corrections from you, Wayne.
We've used cans similar for repeaters in the past - has (I think) 4 slots in a cage inside the can... Although the cover's white, not stainless... |
|
Splitpair
Premium
join:2000-07-29
Cow Towne
·T-Mobile US
1 edit | said by LazMan :We've used cans similar for repeaters in the past - has (I think) 4 slots in a cage inside the can... Although the cover's white, not stainless... It's mostly semantics ADC actually calls their doublers repeaters. Technically a repeater receives the T1 amplifies it and sends it down the span noise errors and all whereas a doubler strips the DS1 out of the incoming carrier cleans it up (error correction) puts it back on a carrier and sends it down the loop. A doubler also has the "smarts" to report span conditions to the line unit as aid in trouble shooting the span.
Wayne
There are T1 repeater housings the upper is a pole mounted pressurized 4 slot and the lower is I think the same in 12 slots.
T1 repeater »www.charlesindustries.com/main/t···ers.html
Wayne
--
If you cannot fix it with a buttset and some bennies you ain't a technician.
|
|
AMD Phreak
Premium
join:2003-12-14 | reply to hussle87
How is the enclosure pressurized?
Is it done at the CO end of the span? |
|
SuperSync
Five Star
Premium
join:2002-01-12
clubs: | AFAIK,
Each case is pressurized locally. To about 6-8 PSI to keep out moisture.
I've never seen one feeding off a pressurized section of cable. |
|
cypherstream
Looking forward to the future of things.
Premium,MVM
join:2004-12-02
Reading, PA
clubs:
1 edit | reply to Splitpair
Wow, thanks Wayne.
I always wondered what those white square boxes were. I figured they were repeaters for some sort of data service from the telco (DSL or T1s). I also see those can's, both in stainless and white. Sometimes the white ones have numbers written on them (looks like a simple sharpie marker wrote on it).
We have a pairgain HDSL unit at work that feeds an Adtran CSU/DSU. We have 8 channels for data and 16 channels for voice. We had problems in the past and the telco guys were in with some fancy Sunrise Telecom meters. Everythings good now though. |
|
Splitpair
Premium
join:2000-07-29
Cow Towne
·T-Mobile US
| reply to SuperSync
said by SuperSync :AFAIK, Each case is pressurized locally. To about 6-8 PSI to keep out moisture. I've never seen one feeding off a pressurized section of cable. I have found a few in manholes (not BST/att) that where pressurized via. the stub vs. an airpipe.
Wayne
--
If you cannot fix it with a buttset and some bennies you ain't a technician.
|
|
