www.broadbandreports.com
  
Search:  

 
   AllHot TopicsCable SupportTelco SupportHardware etcSecurityClubsGallery»»






how-to block ads


 
Forums » Up and Running » Networking » Default Gateway
 
Search Topic:
  Social:
topic feed
 
Posting
toggle:
flat / full
normal / watch
Post a:
Post a:
[Servers] TS Gateway server name for RDC »
« internetopen call 12159  
AuthorAll Replies

Falcao

join:2008-04-30
Brentwood, NY
Default Gateway

Does anybody out there knows why my WAN IP Address and my WAN Default Gateway are the same.I have a DSL connection from Verizon with a Dynamic PPPOE connection along with a D-Link DI-624 wireless router.


Wily_One
Premium
join:2002-11-24
San Jose, CA
Why wouldn't it be? Your DSL "modem" is your gateway. Since all the consumer DSL bridges have but one WAN interface, it's also your WAN IP.

IOW, it's normal.

ChiTang
Premium,MVM
join:2002-08-23
Monterey Park, CA


edit:
May 10th, @03:22PM

said by Wily_One See Profile :

Why wouldn't it be? Your DSL "modem" is your gateway. Since all the consumer DSL bridges have but one WAN interface, it's also your WAN IP.

IOW, it's normal.
No. it is not. The WAN IP (from ISP)should not be the same as the router's IP (default gateway).

May be your Verizon modem is already configured as a router.
--
I used to be indecisive, now I am not sure.


Wily_One
Premium
join:2002-11-24
San Jose, CA
·Pacific Bell - SBC

I use a router between my network and the DSL, so the systems inside my home see 192.168.0.1 as their gateway, which is just the LAN side of the router. The WAN side is the IP address issued dynamically by the ISP. So for me, anyway, the "WAN gateway" and WAN IP are the same.

ChiTang
Premium,MVM
join:2002-08-23
Monterey Park, CA


edit:
May 10th, @04:07PM

said by Wily_One See Profile :

I use a router between my network and the DSL, so the systems inside my home see 192.168.0.1 as their gateway, which is just the LAN side of the router. The WAN side is the IP address issued dynamically by the ISP. So for me, anyway, the "WAN gateway" and WAN IP are the same.
The WAN IP is the IP that assigned by your ISP, which should not be the same as the WAN gateway aka Router's IP or Lan IP.

Added: the "WAN IP" can be obtained by browsing www.myipaddress.com

--
I used to be indecisive, now I am not sure.

Napsterbater
Premium
join:2002-12-28
Milledgeville, GA
·Windstream
·Charter Pipeline

reply to Falcao
With PPP default gateways works a little diffrent. Like my IP is 75.89.57.220 and my default gateway is 151.213.12.111 though you cant send directly to anybody elsa since its a point to point link, Anyways I'm betting d-link just coded their router to show the WAN IP as the Default Gateway on PPPoE connections just because it doesn't really matter to much if you know the real gateways IP or not.
Forums » Up and Running » Networking[Servers] TS Gateway server name for RDC »
« internetopen call 12159  

Most commented news this week
· [99] New Broadband Data Shows U.S. To Be Thoroughly Mediocre
· [81] Sprint To Impose 5GB Monthly EVDO Cap
· [72] Comcast Customer Satisfaction At All Time Low
· [55] Comcast 50Mbps Coming To Florida
· [54] Interested In Pretending You Have Influence On Verizon/NYC Deal?
· [46] Sandvine Jumps On 'Protocol Agnostic' Bandwagon
· [43] Netflix Offers Broadband Set-Top Box
· [42] Comcast Installs DOCSIS 3.0 In Two New Markets
· [38] Sprint Broadband Direct Goes Offline July 31
· [35] AT&T Confirms Dual HD Stream U-Verse Upgrade
Wednesday, 21-May
18:42:06
Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
8th year online! © 1999-2008 dslreports.com.
page compression OFF