sporkme
drop the crantini and move it, sister
Premium,MVM
join:2000-07-01
Budd Lake, NJ
 ·Optimum Online
| reply to onebadmofo
Re: Need a replacement fan
OK, here's the manufacturer's page:
»www.jmcproducts.com/products/dc_···mm.shtml
Looks like 12V, but they have a 5V option as well. It appears to be a 3 lead fan (power + tach). If you can get the rest of the model number, you can also find the CFM. At that point you're just shopping for:
-5V
-40x40x20
-includes a tach lead
-? CFM
That is going to be a very easy find.
Probably very close: »www.buyextras.com/ev40x40x20dc.html |
|
onebadmofo
Repost These Nuts In Your Mouth.
Premium
join:2002-03-30
Reading, PA | Yeah that's the fan. The problem is it's a 2 lead fan. And as far as the connector is concerned, I'll just snip the wires solder and tape the old connector on the new fan. |
|
Phraxos
Premium
join:2004-06-12
UK
| From experience I can tell you that some fans are made specifically for Cisco. If I remember correctly (and I may well not!) the 1760 uses the same fan as the 2950 switch and you can't buy these.
Look for as close a replacement as you can find (voltage, power, pulse lead). You are unlikely to find something as powerful as the Cisco fan but you should be able to find something that will do. |
|
onebadmofo
Repost These Nuts In Your Mouth.
Premium
join:2002-03-30
Reading, PA
| said by Phraxos  :From experience I can tell you that some fans are made specifically for Cisco. If I remember correctly (and I may well not!) the 1760 uses the same fan as the 2950 switch and you can't buy these. Look for as close a replacement as you can find (voltage, power, pulse lead). You are unlikely to find something as powerful as the Cisco fan but you should be able to find something that will do. Jesus...why does this have to be so hard?
Well thanks for the heads up. I'll keep searching. |
|
cow116
Cisco Kid
Premium
join:2003-03-10
Carmel, IN
clubs:  | i had to go on ebay to get replacement fans for my 2900 and 2950 |
|
sporkme
drop the crantini and move it, sister
Premium,MVM
join:2000-07-01
Budd Lake, NJ
·Optimum Online
| reply to onebadmofo
said by onebadmofo :Jesus...why does this have to be so hard? It doesn't. 
Custom-shmustom, it's a friggin' fan. If you get the right voltage and size and the CFM is the same or more, you really don't have anything to worry about.
I'd head on over to the electronics forum here, they're going to know good sources.
Off the top of my head, I'd say if you can't find it at Mouser, I'll eat my shoe.
»www.mouser.com/
Is there anything more to the part number after the 4020? Do you have a picture you can post? |
|
onebadmofo
Repost These Nuts In Your Mouth.
Premium
join:2002-03-30
Reading, PA
edit:
May 14th, @08:14PM
| I'll take my camera in to work with me tomorrow and take a pic of it.
I believe the whole number is 4020-5lb
Edit==HA!! Mouser worked like a charm. There it is. Thank you so much!
|
|
