RickNY
Premium
join:2000-11-02
New York
| reply to tnroroc
Re: [help] 4250 with Std Def TV - How to get rid of Black / Grey
said by tnroroc  :Is there a way to configure the 4250 to remove the black and grey bars that appear on the top / sides when viewing the HD channels? Thanks! On a standard TV, when you view non-HD content through the HD box on an HD channel -- you will see bars on top and bottom.. On HD content on a standard TV, you will see bars on top & bottom. The solution is to get an HD 16:9 television, or you can muck around with the zoom settings on the box with the # key |
|
tnroroc
Let's Rock
join:2001-04-25
Matawan, NJ
| Where exactly is this # key? I do not see it on the front of the box, nor on the remote.
--
rok - Enjoy this game called life, nobody is actually keeping score.  |
|
Stu Pidaso
join:2006-10-12
West Islip, NY
| said by tnroroc :Where exactly is this # key? I do not see it on the front of the box, nor on the remote. It is located on the remote just below the 9 button. |
|
tnroroc
Let's Rock
join:2001-04-25
Matawan, NJ | On my remote the "FAV" button is just below the 9 button. |
|
leo
@verizon.net
| reply to RickNY
ONLY for Hi-def channels... I noticed that I cannot change the pix size when using the composite video [yellow] output, which you're probably using into your std def TV. The pix dimension options only work when using the component [r-g-b] or HDMI outputs.
So, a guess you're stuck with gray borders if using the composite video output.
At least that's what I think. I've only had my HD box for an hour! |
|
