Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Tech and Talk » OS and Software » All Things Unix » Realtek RTL8111C Controller Compatibility
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
sensors/temps question »
« Fresh install of xubuntu blacks out after installing video  
AuthorAll Replies

ozar
Premium
join:2008-04-13
USA
·Embarq

reply to shdesigns
Re: Realtek RTL8111C Controller Compatibility

Didn't work for me.

I installed Arch Linux with the 2.6.25.10 kernel and it used the r8169 driver. The connection does work on very rare occasions, but it fails after most reboots. The r8168 driver wouldn't compile for me, either.

It's a terrible thing to say, but I had to install WinXP just to get back online to find a fix.

Still searching, but thanks to all that have replied.
--
oz

garywk

join:2001-03-06
Clarkston, WA

said by ozar See Profile :

Didn't work for me.

I installed Arch Linux with the 2.6.25.10 kernel and it used the r8169 driver. The connection does work on very rare occasions, but it fails after most reboots. The r8168 driver wouldn't compile for me, either.

It's a terrible thing to say, but I had to install WinXP just to get back online to find a fix.

Still searching, but thanks to all that have replied.
I have the RTL8111/R8168B chip in a Biostar A770 motherboard. It won't work with the 2.6.25-2-amd64 or 2.6.18-amd64 kernel (not recognized). It does work with the 2.6.24-1-amd64 kernel though. Well, at least most of the time anyway. If I try to do a packet capture with Wireshark on that interface I have to ifup/ifdown that interface again before it will work.

I have 2 NICs (2nd NIC not the same chipset) and both will stop carrying HTTP traffic under both the 2.6.18 and 2.6.25 kernels if I start up the Marvell NIC or do a packet capture under the 2.6.24 kernel. To fix that I have to ifdown the problem NIC under the 2.6.18 and 2.6.25 kernels. Under the 2.6.24 kernel I have to stop the capture and ifdown the Marvell NIC. As soon as I do that the other NIC starts sending/receiving normally again and then I can restart the Marvell NIC.

BTW, these are stock Debian kernel images. I've tried compiling the source code for the driver from realtek too, but it won't compile on my machine.
Forums » Tech and Talk » OS and Software » All Things Unixsensors/temps question »
« Fresh install of xubuntu blacks out after installing video  


Monday, 30-Nov 22:24:01 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [50] Baltimore To Ban Lazy Cable Installs
· [41] Broadband Killed The Game Console
· [30] Rural Carriers Quickly Embracing Fiber
· [28] AT&T Top Lobbyist Cicconi Has His Feelings Hurt
· [23] Charter Exits Chapter 11
· [20] Midcontinent Socked With Easement Lawsuit
· [3] Monday Morning Links
· [2] Monday Evening Links
Most people now reading
· Heating - my dad gave me this advice... [Home Repair & Improvement]
· [Rant] called out sick! [Rants, Raves, and Praise]
· Is Microsoft Technet ok to use for my family PC's? [Microsoft Help]
· Issues tonight in North TX? [AT&T Southwest]
· Windows 7 boot manager editing questions [Microsoft Help]
· buying a one way ticket [General Questions]
· filling an in-ground pool [Home Repair & Improvement]
· [Internet] Gaming problem for "Heroes of Newerth" ( New bell Upd [Bell Canada]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· Considering Leaving Vonage, who should I Consider? [VOIP Tech Chat]