republican-creole
Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » O Canada! » Canadian » Canadian Broadband » New OrbMT Version 3.33 - Localized - OneClick ImageHost
Uniqs:
3091
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
RadioActif cable service is gone ? »
« Class Action Lawsuit against CIA/3Web/IGS  

Orbmu2k

@arcor-ip.net

New OrbMT Version 3.33 - Localized - OneClick ImageHost

Have Fun!





Download Version 3.33

Angelo_
The Network Guy
Premium
join:2002-06-18

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

can we get support for 3com 3CRWDR200A-75 routers too plz

Orbmu2k

@arcor-ip.net
Are all displayed informations available?

Make an telnet log wich shows requesting all the need data and post it... then i will see if i can support it.

Bicephale

join:2005-09-24
·TekSavvy Solutions..

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Hi Orbmu2k,

Defaults for the GlobeSpan/Virata (aka
Conexant) Viking/Titan/Vulcan systems


      URL:  192.168.1.1
 UserName:  DSL
 PassWord:  DSL




Source: GNet GBB2060-Xi
Possibly compatible units: GNet BB0060B, VersaTek VersaXpress VER170M, etc.
Orbmu2k

join:2008-09-24

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Sorry but devices wich not delivers a Bit Allocation Table will never be supported by OrbMT!

Amatt(DMT) build a great tool for such devices ... why iventing the wheel again?

Bicephale

join:2005-09-24

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Acknowledged.

HiVolt
29
Premium
join:2000-12-28
Toronto, ON
clubs:
·TekSavvy Solutions..

Works on a SpeedStream 6520, however it does not display all the fields. However DMT 9.01 behaves the same way, so I think it's the modem's fault.

BTW, I like the pic-upload option, very handy.


--
,,!,,('-'),,!,,

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Please make a Debuglog (Double-Click the DSLAM Icon).

I will see wich further informations are avaiable.

Bicephale

join:2005-09-24
·TekSavvy Solutions..

Hi Orbmu2k,

I'm really glad you could pass by!!!



Oh my goodness, i must be crying or i've been staring at the screen for too long!



I wish 'modemtool.csv' had included error rate statistics, though, this would have
allowed the generation of long-term (24 h) "noise" curves such as the one below:


OpenOffice Calc document


Bicephale

join:2005-09-24

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Oups!

Extraneous data has appeared into the fith column (perhaps
beyond): all subsequent columns might be shifted at random
it seems!


Bicephale

join:2005-09-24

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Euh...

In 'modemtool.csv', i mean...

Orbmu2k

@arcor-ip.net

Iam sorry but the error counter is not available on all (or the most) currently supported modems. Also each modem will count them different. Furthermore i do not own all the modems wich are currently implemeted so its hard to add features like this.

But for your Speedtouch you have the choice for STMT and DMT wich have support for the errorcounter, just use them.

PS: I have nothing changed in the modemtool.csv file structure.

Bicephale

join:2005-09-24
·TekSavvy Solutions..

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Hi Orbmu2k,

'OrbMT' supports my Siemens SpeedStream 4200, my
Thomson SpeedTouch 546 and hence both my ST516
units. My other two MoDems are from GNet: one old
BB0060B and a GBB2060-Xi, both with the "Viking-II"
FirmWare and using either a Viking or Vulcan ChipSet
from GlobeSpan/Virata/Conexant. All of my MoDems
(six) provide Error Rate information and i'm ready to
provide "Debug" logs for those, when Angelo is done!

He! He!

The GNet CLIs appear to be highly compatible, for
all practical pruposes: e.g. the addition of support
for one GNet will most likely translate as support for
many more clones such as VersaTek's VersaXpress
VER170M, etc. I'd be very pleased to contribute!...

-=*=-

The 'stmtlog.txt' file generated by 'STMT' doesn't
include the Error Rate information, i'm not sure it
can be made to record samples at regular intervals
and i'm almost certain there's no option to adjust
the duration of those eventual intervals anyway...

The 'DMT v7.35' log file ('dmtdiag.txt', whatever)
does include the Error Rate information and it can
have its sampling rate set to a high resolution of
fifteen seconds (wow!) but i noticed the records
can be scrambled by random dates in innapropriate
fields, i'm afraid!!! The "noise" curve i've shown in
a previous post was created using the 'DMT v7.35'
"Diagnosis" file, actually; this graph was created
by 'OpenOffice Calc' but i believe that the glitch
at the start of the last segment was caused by one
of those random events which polute 'dmtdiag.txt'.

-=*=-

I understand your situation regarding new devices/
features all too well, my hope was simply that some
of us would give you the feedback you seek... It's
good news enough already to have 'OrbMT' released
in English, 'OrbMT' adds nicely to our arsenal and
the stylish design makes it pleasant to use, not to
mention all of the numbers are found in one small
capture which can be turned into an animated .GIF!

Honestly, my opinion is that the major improvements
which were made lately are worth a congratulation;
personally, i was quite pleased, on top of that, as i
have discovered that 'modemtool.csv' was implicitly
compatible with SoftWare such as 'OpenOffice Calc',
which does turn it into a professional grade trouble-
shooting tool. Speaking of that, here's that sample
where i could observe column shifting earlier today:


Please, consider that i mean this as a constructive
contribution only. It's hard enough to make contact
with authors like you, BoxFan and Amatt these days,
i don't want to be annoying! Euh... But if i may...

Is it possible to obtain a copy of the source-code?

P^)

NeTwOrKDawg
Networking is a lifestyle

join:2005-04-25
Brantford, ON
Nice tool.. uploading is so easy.

Here is my stats as show by this... I love it!


Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

here is the info you wanted, i can do more comamnds if you wish

user name is admin (which can't be changed)and the password default is admin but it can be changed if the user wants to.

Angelo_
The Network Guy
Premium
join:2002-06-18

1 edit

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

> swversion

Usage: swversion show
swversion --help
> swversion show

software verson: v3.6.1_SH
3CRWDR200A-75_v3.6.1_SH
>

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

to get line card type

3Com ADSL Router
Login: admin
Password:
> adsl info --vendor

adsl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason: 0
Channel: INTR, Upstream rate = 512 Kbps, Downstream rate = 5056 Kbps
ChipSet Vendor Id: IKNS:0x 100
ChipSet VersionNumber: 0x 100
ChipSet SerialNumber:
>

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

81 8
82 8
83 8
84 8
85 8
86 8
87 8
88 8
89 8
90 8
91 8
92 8
93 8
94 8
95 8
96 8
97 8
98 8
99 8
100 8
101 8
102 8
103 8
104 8
105 2
106 8
107 8
108 8
109 8
110 7
111 5
112 5
113 4
114 4
115 5
116 6
117 6
118 7
119 7
120 7
121 7
122 7
123 7
124 7
125 7
126 7
127 7
128 7
129 5
130 7
131 7
132 7
133 7
134 7
135 7
136 7
137 7
138 7
139 7
140 7
141 7
142 7
143 7
144 7
145 7
146 7
147 7
148 7
149 7
150 7
151 7
152 7
153 7
154 7
155 7
156 7
157 7
158 6
159 6
160 6
161 6
162 5
163 5
164 5
165 5
166 6
167 6
168 6
169 6
170 7
171 6
172 7
173 7
174 7
175 7
176 7
177 7
178 7
179 7
180 7
181 7
182 7
183 7
184 7
185 7
186 7
187 7
188 7
189 7
190 7
191 7
192 7
193 7
194 7
195 7
196 7
197 7
198 7
199 7
200 7
201 7
202 7
203 7
204 7
205 7
206 7
207 7
208 7
209 7
210 7
211 7
212 7
213 7
214 7
215 7
216 7
217 7
218 7
219 7
220 7
221 7
222 7
223 7
224 7
225 7
226 7
227 7
228 7
229 7
230 7
231 7
232 7
233 7
234 6
235 7
236 7
237 7
238 7
239 7
240 7
241 7
242 7
243 7
244 7
245 7
246 7
247 7
248 7
249 7
250 6
251 6
252 5
253 5
254 4
255 0
> adsl
Usage: adsl start [--up] [--mod ] [--lpair ]
[--trellis ] [--snr ] [--bitswap ] [--sesdrop ] [--sra ]
[--CoMinMgn ] [--i24k ] [--phyReXmt ]
adsl stop
adsl connection [--up] [--down] [--loopback] [--reverb]
[--medley] [--noretrain] [--L3] [--diagmode] [--L0]
[--tones]
adsl configure [--mod ] [--lpair ]
[--trellis ] [--snr ] [--bitswap ] [--sesdrop ] [--sra ]
[--CoMinMgn ] [--i24k ] [--phyReXmt ]
adsl bert [--start ] [--stop] [--show]
adsl afelb [--time (sec)] [--tones] [--signal ]
adsl qlnmntr [--time (sec)][--freq (msec)]
adsl info [--state] [--show] [--stats] [--SNR] [--QLN] [--Hlog] [--Hlin] [--HlinS] [--Bits] [--linediag] [--reset][--vendor]
[--cfg]
adsl --version
adsl --help
> adsl afelb --tones
adsl: invalid parameter for option --tones

Angelo_
The Network Guy
Premium
join:2002-06-18
if you need anything else let me know

Angelo_
The Network Guy
Premium
join:2002-06-18

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

3Com ADSL Router
Login: admin
Password:
> adsl --version
adsl version 1.0
ADSL PHY: AnnexA version - A2pB022g.d20h
>

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Have you tried ModemType -> AdslCtl already?

Angelo_
The Network Guy
Premium
join:2002-06-18

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

yes it doesn't work

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Error Message?

Please make a Debuglog after Refresh
(Double-Click the DSLAM Icon).

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

telnet.log 107 bytes

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Mhhh ... its waiting for a logon prompt for 5 seconds but nothing happens.

can you describe the logon procedure for this modem?

Angelo_
The Network Guy
Premium
join:2002-06-18

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

when you telnet into it it prompts you for a Login: which is admin and a password: (default admin unless changed)

the prompt is >

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

this is strange because int the log the tool waits for a prompt but the modem does not say anything. no welcome nothing.

btw: whats the full vendor name of the "IKNS" dslam chipset verdor id?

Orbmu2k

@arcor-ip.net
Ok solved ... IKNS is Ikanos Communications

Ive uploaded a new version 3.34 (same link) ... please try AdslCtl again and attach the telnet_tc.log please.

yoe

@bell.ca
how do you make this work on a bell 6520 modem in bridge mode?

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

awesome it seems to work now heres the telnet debug log again

under info can you see if you can get the firmware loaded to show up there?

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

nice!

redownload please ... ive done a last minute fix with firmware i think

Angelo_
The Network Guy
Premium
join:2002-06-18

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

ok sec

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

telnet_tc.log 7,723 bytes  

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

ok new version released...

this schould solve it

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

telnet_tc.log 7,702 bytes  
seems broken

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

Ok i removed the dirty detection again .... increased wating delay to 10 seconds instead... hope this helps ... if not we are giong to live with that i fear.

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

telnet_tc.log 7,712 bytes  

Orbmu2k

@arcor-ip.net

Re: New OrbMT Version 3.33 - Localized - OneClick ImageHost

3.36 is up

if this does not help i have no idea anymore.

your modem does not respond very well

Angelo_
The Network Guy
Premium
join:2002-06-18
·TekSavvy Solutions..

telnet_tc.log 138 bytes  
3.36 seems to have broken it completely again

i guess we need to live with what we had before.

See 9 replies to this post

Angelo_
The Network Guy
Premium
join:2002-06-18
and yes, i guess that does mean i am done lol
Forums » O Canada! » Canadian » Canadian BroadbandRadioActif cable service is gone ? »
« Class Action Lawsuit against CIA/3Web/IGS  


Thursday, 10-Dec 03:27:05 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [200] Sprint Sued For Distracted Driving Death
· [116] AT&T Launching New 24 Mbps U-Verse Tier
· [82] 3G Network Test Says AT&T Is Tops
· [72] Mediacom Unveils 105 Mbps Pricing
· [66] Sprint Poised For A Turnaround?
· [66] WPA Cracker: Test WPA-PSK Networks In 20 Minutes
· [66] AT&T Hints At Usage-Based iPhone Data Pricing
· [51] The Future Of Wi-Fi Is Bright
· [47] Site Leaks Yahoo, Verizon Fed Data Share Pricing
· [45] Microwaving Your Innards Is Not 'Extreme'
Most people now reading
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· The aftermath [World of Warcraft]
· Adobe Flash Player version 10.0.42.34 [Security]
· Battered Hilt Delimma [World of Warcraft]
· Cross Server Dungeon Experience [World of Warcraft]
· ICC strats [World of Warcraft]
· Windows 7 boot manager editing questions [Microsoft Help]
· Comcast refused to install 400' feet. [Comcast HSI]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]