Re: Will this hurt my radio?

Author	All Replies
ehenry join:2007-11-07 Fairbury, IL	reply to KiZiller Re: Will this hurt my radio? said by KiZiller : said by ehenry : How long do i actually have before this damages the radio? That sounds like a lot of power as compared to a typical link, but in reality it is very tiny. My guess is that your caution is unfounded. The AGC in the front end can probably handle 0 dBm or more with no damage. So in your opinion, there will be no damage? Is there any documentation that you can offer to support this? Not that I don't take opinions, I would rather not harm a customer radio because of a faulty install.
ehenry join:2007-11-07 Fairbury, IL	to forum · permalink · · 2008-09-26 13:33:37 ·
KiZiller @rr.com	said by ehenry : ... I would rather not harm a customer radio because of a faulty install. Like EMC guy said, a definitive answer would be from the manufacturer. In light of the rest of EMC's post, it sounds like wi-fi microwave radios are not typically designed with automatic gain control of the front end strip. I have no experience with microwave radio circuit design or servicing, so my guess about the potential damage is weakened by what EMC has said. Get a piece of metal screen wire and fold it over one of the antennas. Adjust the signal to a more comfortable level with a pair of scissors.
KiZiller @rr.com	to forum · permalink · 2008-09-26 14:09:22 ·
RadioDoc 58ef2c0 Premium,ExMod 2000-03 join:2000-05-11 ·AT&T Midwest	said by KiZiller : Get a piece of metal screen wire and fold it over one of the antennas. Adjust the signal to a more comfortable level with a pair of scissors. Putting a metal screen in front of any transmitting antenna is a horrible idea.
	to forum · permalink · · 2008-09-27 13:28:47 ·
Get Wireless join:2007-07-31 1 edit	reply to KiZiller said by KiZiller : said by ehenry : ... I would rather not harm a customer radio because of a faulty install. Get a piece of metal screen wire and fold it over one of the antennas. Adjust the signal to a more comfortable level with a pair of scissors. That is the most unprofessional thing I have ever heard posted here and I hope no one actually tries it. Anything under 1/4" mesh will block all 2.4GHz radiation and possible damage the internal radios LNA.
Get Wireless join:2007-07-31 1 edit	to forum · permalink · · 2008-09-27 15:20:58 ·


Wednesday, 09-Dec 20:18:03	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. republican-creole page compression OFF