jggiii2
join:2008-11-13
Mont Vernon, NH
| reply to Jodokast96
Re: Westell 7500: Disabling Access to Admin UI from Wireless:
It's just temporary until I solve this issue, then the network can be opened for guest use. I'm just using it to keep the curious out until I can keep them away from the router.
After digging through the source code, I believe I've found that the wireless interface is identifed as wl0. So, I will try adding this to the medium firewall settings tomorrow:
${APPEND} inlan_level_input_filter -i wl+ -d 192.168.1.1 --dport 80 -j logOutboundBlocked
in the LAN to Modem section and see if I turn the router into a brick or not  .... |
|
Bytebender
Bytebender
Premium
join:2008-02-12
Canada
| said by jggiii2  :After digging through the source code, I believe I've found that the wireless interface is identifed as wl0. So, I will try adding this to the medium firewall settings tomorrow: ${APPEND} inlan_level_input_filter -i wl+ -d 192.168.1.1 --dport 80 -j logOutboundBlocked If you changed the LAN IP of the device, this code should contain the new address, no?
--
reboot, reset, reconfigure, then recycle. |
|
jggiii2
join:2008-11-13
Mont Vernon, NH | Yep, did that. No good. My guess is that the Verizon folks grant access before the user-modifiable script is executed.
Decided to tell him to send it back and I'll use a Linksys box with DD-WRT. No sense in screwing with it. |
|
