From the paper I just checked it should be no more than 2496/800 and one of my relatives was placed on that profile his line can handle 11 meg so you may want to recheck your sources...I am looking at the DSLSK usoc/speed page. -- My Canada includes Quebec.
From the paper I just checked it should be no more than 2496/800 and one of my relatives was placed on that profile his line can handle 11 meg so you may want to recheck your sources...I am looking at the DSLSK usoc/speed page.
Glen that info comes from our process people.
DSLSK - PSQT SYNC RATE QUALIFICATION RANGE IS BETWEEN 2400 AND 2999
Official speed for DSLSK is listed as al1_d2496-2496-256_u800-800-256
I have not seen that profile for quite a while in Lantern, but I have seen al2_d2496-2496-256_u640-640-256.
Since the PSQT rate is up to 2999, al1_d3008-3008-256_u800-800-256 is now the default profile for Essential Plus as long as the copper line is capable of handling that speed.
Well that is good news for my relative if that is what your process people are saying. I guess if they removed the AL1 profile awhile back (Lantern) they are allowing the higher speed instead of taking it down to 1796 for a non interleave profile...makes sense and I don't think anyone will mind. I stand corrected and thanks for the update. -- My Canada includes Quebec.
·