Re: BEFSR41 - dslreports.com

Author	All Replies
GeekNJ Premium join:2000-09-23 Waldwick, NJ	reply to Thane_Bitter Re: BEFSR41 DHCP only matters if using the WAN port. Is the original poster all set or is something still not working?
GeekNJ Premium join:2000-09-23 Waldwick, NJ	to forum · permalink · · 2008-12-01 08:46:20 ·
flibby3655 Premium join:2004-12-19 Lompoc, CA	All set, thanks. Turning off or disabling DHCP is what did the trick.
flibby3655 Premium join:2004-12-19 Lompoc, CA	to forum · permalink · · 2008-12-01 09:14:15 ·
Thane_Bitter join:2005-01-20 London, ON ·Bell Sympatico	reply to GeekNJ said by GeekNJ : DHCP only matters if using the WAN port. The WAN side of that model router can only have a static IP, or have one assigned to it by a DHCP server (I will ignore PPPoE, PPTP since they are not relevant in this discussion); it lacks the architecture for generating address (i.e. no DHCP server functions). The LAN side on the other hand does include a DHCP server (and usually must have a static IP). Assuming that the OP has another DHCP server on the rest of his/her network (based on the statement "plug line in to lan 1 and other pc to lan 2") issues will arise (duplicate IP’s). There are ways to run multiple DHCP servers on a network, but pre-configuration is required to prevent address overlap. BEFSR41 v 1 - 3 cannot be assigned an IP address by a DHCP server, it might be possible in v4. Something like a WRT54g with 3rd party firmware on the other hand will. -- The Wagon Queen Family Truckster; sure you think you hate it now, but wait till you drive it.
	to forum · permalink · · 2008-12-01 10:51:30 ·


Wednesday, 09-Dec 09:08:17	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF