DarkLogix
join:2008-10-23
Baytown, TX | reply to OSUGoose
Re: What needs to be grounded?
Prove it
its fiber thus non conductive |
|
OSUGoose
join:2007-12-27
Columbus, OH
clubs: | the fiber its self is. But the armored cable sheath that its enclosed, needs to be, unless they are refering to the fiber drops that are inside conduit, which i dont think had tracer wire sheathing or anything. |
|
PoloDude
Premium,VIP
join:2006-03-29
East Northport, NY | Educate yourself. Having spliced and cut down many of these
THERE IS NO METAL IN THEM! The are wrapped in Kevlar. Also very few of the tracable buried service feeds are actually in use. |
|
OSUGoose
join:2007-12-27
Columbus, OH
clubs: | Key word there, ur ferering to aerial, im refering to burried |
|
ramslt8
join:2007-12-07
Lutz, FL
| Buried drops that are used in Florida that do have a 24ga "tracer" wire ARE grounded at the ONT or to the MGN at the house per Verizon's Bonding and Grounding Rules. There were some early installs (2005) that the fiber did not have a tracer so a 3 pair copper drop was buried along side of the fiber for locating purposes but those copper drops were not connected to the house they were just cut off at ground level.
Trust me we are in the LIGHTNING CAPITAL and we (Verizon)along with Tellabs have tried everything possible in trying to prevent ONT's from getting taken out by lightning. In fact the new 612A that is coming out is a result from Tellab's testing in Florida, 612A will have additional surge suppression built into the POTS connections. |
|
