LeftyJR
join:2008-02-19
Lock Haven, PA
2 edits | Help with upstream
Here are my transceiver statistics from my modem:
Transceiver Revision: 4.3.0.1
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3360 704
Margin (dB) 20.5 10.0
Line Attenuation (dB) 19.5 9.0
Transmit Power (dBm) 7.5 11.8
Connection Rate (Down/Up): 3360 Kbits/sec by 704 Kbits/sec
Connection Status In Packets
Out Packets 839286
679059
In Error Packets
Out Error Packets 0
1
Is there any way to improve this upstream? I am paying for the 3mbps package. |
|
Jodokast96
R.I.P Bassman442
Premium
join:2005-11-23
Erial, NJ | Can you connect the modem to the NID and pull the stats from there? I'm guessing there is some sort of internal wiring problem. |
|
tschmidt
Premium,MVM
join:2000-11-12
Milford, NH
 ·Verizon Online DSL
·Fairpoint Communic..
| reply to LeftyJR
Your stats are bizarre. Based on Attenuation you are just about on top of the Central Office yet margin is very low.
Connecting modem to NID as Jodokast96  suggest disconnects inside wiring/equipment. If stats improve something within your residence is degrading DSL.
How is phone service? Any noise on line especially when phone first picked up? Do you hear other voices on the line (crosstalk). If so call Voice repair, not Verizon on line to fix service.
/tom |
|
LeftyJR
join:2008-02-19
Lock Haven, PA
4 edits | reply to LeftyJR
Ok...let me see what my setup is like.
How can I tell that I'm close to the office...is it because the attenuation is under 20? |
|
LeftyJR
join:2008-02-19
Lock Haven, PA
2 edits | reply to Jodokast96
How do I give the modem power outside? My NID is pretty far from any power outlet.
I've never noticed any noise on the line, no. |
|
Jodokast96
R.I.P Bassman442
Premium
join:2005-11-23
Erial, NJ | Extension cord for modem power and either a laptop, long ethernet cable, or wireless for pc access. |
|
tschmidt
Premium,MVM
join:2000-11-12
Milford, NH
·Verizon Online DSL
·Fairpoint Communic..
| reply to LeftyJR
said by LeftyJR :How can I tell that I'm close to the office... The only accurate way is to have the phone company do a mechanized loop test (MLT). This does a parametric test of the line. As a back of the envelop multiplying downstream attenuation by 250 gives you some idea. Keep in mind distance is a function of type of wire used and bridged taps.
»www.wilcominc.com/documents/WILC···Test.pdf
said by LeftyJR :How do I give the modem power outside? My NID is pretty far from any power outlet. Either use an extension cord to power up the modem at the NID or get a telephone extension cord to plug into the NID while modem and you stay nice and warm in the house.
/tom |
|
LeftyJR
join:2008-02-19
Lock Haven, PA | Thanks guys, but its freezing outside tonight and snowing. I'll get onto it within the next day or two and I'll post with an update. |
|
