republican-creole
site Search:


 
    All Forums Hot Topics Gallery






how-to block ads


 
Search Topic:
Uniqs:
2400
Share Topic
Posting?
Post a:
Post a:
AuthorAll Replies


Ankita

@..airtelbroadband.in

How to create v4 over v6 tunneling on SOLARIS??

Hi All,

My requirement is to create a v4overv6 tunnel on both solaris machines and need to access one machine from another
For this, I am trying to create a v4 over v6 tunnel on Solaris. Can I get the exact information regarding it. Here, I am putting few trails I did so far.

1.) Initially I tried creating v6 over v4 tunnels with the following commands and worked out:
ifconfig ip.tun1 inet6 plumb
ifconfig ip.tun1 inet6 tsrc 192.168.2.4 tdst 192.168.2.6 up
ifconfig ip.tun1 inet6 addif fe80::a00:27ff:fe03:b9a4 fe80::a00:27ff:fe03:b9a4 up

I tried to use same kind of syntax to create v4 over v6 tunnel as well
ifconfig ip.tun1 inet6 plumb
ifconfig ip.tun1 inet6 tsrc fe80::a00:27ff:fe03:b9a4 tdst fe80::a00:27ff:fe03:b9a4 up
ifconfig ip.tun1 inet6 addif 192.168.2.4 192.168.2.6 up
But I am getting errors like this:-
ifconfig: fe80::a00:27ff:fe03:b9a4: bad address
ifconfig: 192.168.2.4: bad address

2.) I was trying to execute following command (which I got from google)
ifconfig ip6.tun1 inet plumb tsrc fe80::a00:27ff:fe03:b9a4 tdst fe80::a00:27ff:fe03:b9a4 up
It has thrown the following error:-
ifconfig : Failure : ip6.tun1 : Cannot assign requested address.

3.) I also tried another command.
ifconfig ip6.tun1 inet plumb 192.168.2.4 192.168.2.6 tsrc fe80::a00:27ff:fe03:b9a4 tdst fe80::a00:27ff:fe03:b9a4 up
It has thrown the same error but has assigned the IPv4 address:-
ifconfig : Failure : ip6.tun1 : Cannot assign requested address.

Please do the needful.

Thanks in Advance.
Ankita Kumari


justbits
More fiber than ATT can handle
Premium
join:2003-01-08
Chicago, IL

1 edit

Try the commands shown in "Configuring IPv4/IPv6 Tunnels" at
»docs.sun.com/app/docs/doc/816-51···m?a=view



Ankita

@..airtelbroadband.in

Thank you for your reply.But the command you have suggessted is not working.I am getting an error like "Cannot assign the requested address".


mkt

join:2002-12-04
Kaukauna, WI

reply to Ankita
Check out this blog entry from a Sun Employee

»blogs.sun.com/DanX/entry/solaris···el_setup


Sunday, 03-Jun 19:21:31 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 12.5 years online © 1999-2012 dslreports.com.
Most commented news this week
Hot Topics