Reviews:
 ·RoadRunner Cable
 ·ViaTalk
2 edits | DIR-655 1.31 Firmware available Just to try to keep things a little organized I am starting a new thread.
Dlink has released 1.31 for the dir-655 this firmware like 1.30 is can not be downgraded. Upgrade with caution.
1.30 has been pulled from the ftp site. So the beta 1.30 seems to be done.
Release notes for 1.31
Firmware: 1.31
Date: 04/28/09
1. New SharePort support PC/Mac (Requires New Utility Installed on PC or Mac to work)
2. Add SecureSpot 2.0
3. Add Graphical authentication to log-in page.
4. Fix DHCP server issue.
5. Modify the turn from "Network USB" to "SharePort" in the option of "My USB Type is:"
6. Add Advanced DNS Service feature.
7. Remove the 3G from GUI
8. Fix LLTD wrong icon in Vista.
9. Fix reboot issue when connecting to Internet
10. Fix if set more than 8 Trigger or Firewall port in Application Rules, it will show warning message.
11. Fix bug: When QRS set wan type of rt to DHCP, the rt will not set Primary and second DNS.
12. This firmware can not be downgraded to previous versions.
13. Guest Zone disable SharePort support (USB spec v1.05)
14. Router time is not reset when factory reset.
15. Fix schedule end time error.
Note: This firmware does not allow downgrading to pre-1.3x. Please save your configuration file before the upgrade. After the upgrade, please reset to factory default, then upload the configuration file image. |
|
KGB7
join:2003-12-17
Rockville, MD
1 edit | Re: Dir-655 1.31 firmware available You beat me to it, i was about to make a thread.
Time to test it.
....
Cant test it yet, my roomie still watching porn on his laptop..lol |
|
 ScreeIn the pipe 5 by 5
join:2001-04-24
Mount Laurel, NJ | reply to dcurrey
Better wait, it should be pulled any time from now to Friday. LOL |
|
| reply to dcurrey
7. Remove the 3G from GUI
OMG, no 3G support anymore?!
13. Guest Zone disable SharePort support (USB spec v1.05)
What does that mean in practic?
What about wifi b standart? Is it back? |
|
| reply to dcurrey
802.11 "b" support is back. |
|
Reviews:
·Cogeco Cable
| reply to dcurrey
Tested, A3 hardware.
802.11b networking is available, but haven't tested it.
Seems to work quite well actually, after upgrading the router my notebook's N speed jumped from 150mbps max to 300mbps max, varying from 90mbps all the way up to 300.
Haven't had any issues so far, web browsing seems to be a bit more responsive and quicker also. |
|
| What version of firmware did you upgrade from?
Since I don't need 'B" any reason I should do this upgrade? |
|
| reply to GMCinema
said by GMCinema :
802.11 "b" support is back.
This is great news! |
|
| It looks like they also changed the wifi certification logo on the product info page. They added the "b" back! |
|
ScreeIn the pipe 5 by 5
join:2001-04-24
Mount Laurel, NJ | reply to dcurrey
Just too many angry nintendo users out there! (they're such a scary crowd, dlink had to give in!) lol |
|
|
|
Reviews:
·Cogeco Cable
| reply to dcurrey
Upgraded from 1.22 beta.
I have noticed a significant improvement on the wireless side, on N mainly. 802.11g performance is roughly the same.
802.11b is also available anyway.
Is there any reason not to upgrade? I don't think so, works well for me. |
|
| I am using 1.30. Me thinks 1.31 is the same except for the 802.11b. And I don't need it so unless I hear otherwise I am sitting this one out. |
|
 MsradellP.E.Premium
join:2008-12-25
Louisville, KY
 ·AT&T U-Verse
·Insight Communic..
| reply to Scree
said by Scree:Just too many angry nintendo users out there! (they're such a scary crowd, dlink had to give in!) lol They should just upgrade their equipment like the rest of us do! Either that or just go back to wires, don't keep demanding that antique legacy standards be maintained! |
|
| reply to dcurrey
Re: DIR-655 1.31 Firmware available I was running on 1.21 firmware earlier, all was working fine nearly, just a few glitches in 1.21.
Because of the small glitches I decided to try out 1.30 firmware, it works too. .. The only thing I have problem with now is the ports, my FTP server is not working after the upgrade, can't get port 21 to open anymore, strange!
Now I have upgraded to 1.31, same thing and a downgrade is impossible, bummer!
Anyone else notice any strange things with port openings?
/dioden |
|
| I have a couple udp ports open for some voip stuff. Seemed to work ok. Try restoring default either via the web gui or the reset button and manually set it back up. |
|
| reply to Msradell
Re: Dir-655 1.31 firmware available said by Msradell:said by Scree:Just too many angry nintendo users out there! (they're such a scary crowd, dlink had to give in!) lol They should just upgrade their equipment like the rest of us do! Either that or just go back to wires, don't keep demanding that antique legacy standards be maintained! You can buy a Nintendo DS today that only supports 802.11b with WEP. The user cannot upgrade, it is Nintendo who keeps this around. The DS is still a popular product at a reasonable price that is sold alongside the New DSi. The new DSi that just came out this month does support faster wifi standards and better wireless security but the price is approx $40 higher. The DS will be in play for a few more years....
In my case, the DS connects to an unsecured Guest Network. I will not compromise my main network. |
|
KGB7
join:2003-12-17
Rockville, MD | There is not need to upgrade DS from b to g standard. Plus the price of DS will go up as well. |
|
| reply to dcurrey
Re: DIR-655 1.31 Firmware available Already done that, same problem though. .. |
|
MsradellP.E.Premium
join:2008-12-25
Louisville, KY Reviews:
·AT&T U-Verse
·Insight Communic..
| reply to KGB7
Re: Dir-655 1.31 firmware available The difference in cost to change from b to g is so small it's not even worth considering. Since they already have developed the software for the DSi it would only be a hardware cost which I'm sure would be much less than $1.00. Is just that they're too stubborn and backward to make the change. I agree maybe the older units couldn't be upgraded (maybe they could) but at least any new DS's they make should meet the newer standard! |
|
mlino
join:2006-01-25
Brazil | reply to dcurrey
Re: DIR-655 1.31 Firmware available
Routing option |
My router uses firmware 1.21 and I cannot make static route to my own LAN, only to WAN port. I will just upgrade if this option is available.
Thanks!
Marcio |
|
