Re: how to connect speed stream 5100a in indonesia?

Author	All Replies
graysonf Premium,MVM join:1999-07-16 Fort Lauderdale, FL	reply to dimas Re: how to connect speed stream 5100a in indonesia? Well, for starters, the VPI/VCI settings between the two locations are probably different. Does this unit auto-detect them? If it does, it's not working. If it doesn't you have to know the correct values and configure this manually.
	to forum · permalink · · 2009-05-04 10:01:36 ·
Doctor Olds I Need A Remedy For What's Ailing Me. Premium,VIP join:2001-04-19 1970 442 W30 clubs:	The SBC 5100a (060-E141-A01) is pre-configured to only work with eight (8) most popular Virtual Circuit pairs (aka VPI/VCI pairs). • 0/35 • 8/35 • 0/43 • 8/43 • 0/51 • 8/51 • 0/59 • 8/59 This is seen in the Web Interface only after you add the 5100's MAC ID to the ARP table entries. »Efficient Networks Forum FAQ »Can I see what the Web Interface of the SBC Customized 5100s look like? »Ameritech - SBC FAQ »Funhouse info on the original 5100a Modem including how to get at line stats Otherwise the Web Interface on a 5100 Bridge is not accessible with out the special ARP command as not all 5100 had a Web Interface that you could reach using »speedstream or not unless you manually add the IP of the 5100 Modem to your PCs ARP table entries. Accessing the Web Management Interface on my SpeedStream 5100 or 5200 HTH -- What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?
	to forum · permalink · · 2009-05-04 13:50:20 ·


Thursday, 10-Dec 22:01:12	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF