republican-creole
Search:  

 
theme to black backgroundlet page decide theme
HomeFind ServiceReviewsISP NewsFAQsForumsToolsDatabaseAbout 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » 2Wire » Port forward w/o DHCP
Search Topic:
 Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Links: ·Read the FAQs! ·Need Help? ·2W Home Page ·2W Support Page
2Wire problem »
AuthorAll Replies


joako
Premium
join:2000-09-07
/dev/null
·AT&T U-Verse

reply to wayjac
Re: Port forward w/o DHCP

Everything is connected to the same dumb switch. DHCP is enabled on the 2wire. I need to remote into the network to change the DHCP server settings to assign the correct default gateway. There is 1 machine with a static IP address and it can access the internet.
--
PRescott7-2097
to forum · permalink · · 2009-06-03 17:34:22 · Reply to this


wayjac
Premium,MVM
join:2001-12-22
Indy		 I can't help you with this issue
Someone else may be able to help you
to forum · permalink · · 2009-06-03 17:52:17 · Reply to this

efflandt

join:2002-01-25
Elgin, IL
·AT&T Midwest

reply to joako
said by joako See Profile :

Everything is connected to the same dumb switch. DHCP is enabled on the 2wire. I need to remote into the network to change the DHCP server settings to assign the correct default gateway. There is 1 machine with a static IP address and it can access the internet.
That does not quite make sense. The LAN IP of the 2Wire is your LAN gateway. If you try to remote into that PC on your LAN to change the gateway (2Wire LAN IP), the PC you remoted to would suddenly not have a proper gateway, so you would not be able to reconnect to it to fix its gateway.
to forum · permalink · · 2009-06-11 21:51:37 · Reply to this


joako
Premium
join:2000-09-07
/dev/null
·AT&T U-Verse

 All is resolved now. Someone was putting the default gateway into the "static routes" instead of the proper place.

The 2wire is not the DHCP server, I needed to change the DHAll> All is resolved now. Someone was putting the default gateway into the "static routes" instead of the proper place.
--
PRescott7-2097
to forum · permalink · · 2009-06-11 22:35:42 · Reply to this
-
Forums » Equipment Support » Hardware By Brand » 2Wire2Wire problem »

Monday, 30-Nov 12:02:01 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [21] Broadband Killed The Game Console
· [18] AT&T Top Lobbyist Cicconi Has His Feelings Hurt
· [16] Midcontinent Socked With Easement Lawsuit
· [3] Monday Morning Links
· [1] Rural Carriers Quickly Embracing Fiber
Most people now reading
· Are GPS's better today? [General Questions]
· Considering Leaving Vonage, who should I Consider? [VOIP Tech Chat]
· Options if ACTA is ratified [TekSavvy]
· Portable power for blackouts? [Home Repair & Improvement]
· filling an in-ground pool [Home Repair & Improvement]
· Whats the big deal about being "Old School"....? [World of Warcraft]
· [Newsgroups] Newzleech down? [Filesharing Software]
· Is Easynews down? [Filesharing Software]
· Windows 7 boot manager editing questions [Microsoft Help]
· Maximizing Rogue DPS for ToC/ToGC (3.x) [World of Warcraft]