how-to block ads
|
aerinndis
join:2008-08-27
| [Help] Syncflood attack on Belkin I have been getting hundreds of syncflood attacks the last three days and it's cutting me off of the internet, sometimes for hours. I have tried searching to find a fix for this problem and I don't understand the answers, I need it spelled out in layman's terms.
Belkin doesn't seem to have a whole lot in the way of features. My cousin said to enable stateful packet inspection but of course this Belkin crap doesn't have it. I tried updating the firmware as someone on MajorGeeks suggested saying that it worked. It didn't work and my whole firewall log got erased. I'm going to post here what is in my firewall log just since the router rebooted itself. The most predominant IP I looked up and it's Akron, Ohio but I was told it's probably a spoofed IP.
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:09:22 2009
Found Syncflood attack from 61.147.107.56 in port 2967 => Sun Jun 14 04:09:22 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:19:11 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:19:41 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:27:25 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:27:55 2009
Found Syncflood attack from 125.65.112.217 in port 8000 => Sun Jun 14 04:32:02 2009
Found Syncflood attack from 125.65.112.217 in port 7212 => Sun Jun 14 04:32:02 2009
Found Syncflood attack from 125.65.112.217 in port 3128 => Sun Jun 14 04:32:02 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:33:34 2009
Found PortScanner attack from 64.22.131.8 in port 1774 => Sun Jun 14 04:38:12 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:42:20 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:48:31 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:49:01 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 04:58:49 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 05:10:11 2009
Found Syncflood attack from 61.160.216.187 in port 7212 => Sun Jun 14 05:13:16 2009
Found Syncflood attack from 61.160.216.187 in port 8000 => Sun Jun 14 05:13:16 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 05:21:00 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 05:21:30 2009
Found Syncflood attack from 76.244.157.122 in port 43691 => Sun Jun 14 05:29:45 2009
Is there something in the router settings I can do to stop this? I don't even know what any of it means, had to google syncflood lol. | |
|  aerinndis
join:2008-08-27
| Re: [Help] Syncflood attack on Belkin Ok I turned off the modem and unhooked everything and left it that way for an hour so it would release it's IP and get a new one when I turned it back on. It gave me the same exact IP and I have at least 100 more of these attacks. There's also a crapload of "get IP" and WAN disconnection messages......exactly every 11 seconds on the dot. Time Warner said it's not their problem since the attacking IP's aren't one of their customers. | |
| | 
Its a Secret
Whatever
Premium
join:2008-02-23
U B Funny
1 edit | First off, stop logging the attacks, it may help. Close your ports if any are open. Are you using p2p? If so, shut it down and see if it stops.
When this happens to me, they bounce and I don't miss a beat for uptime. | |
| aerinndis
join:2008-08-27 | The router logs them automatically, I can't stop it. There is no function on Belkin to close ports so that's not a possibility. What is P2P? If you mean file sharing then no, I have never downloaded mp3's or anything else. | |
| | 
sivran
Long Live The Suite
Premium
join:2003-09-15
Arlington, TX
clubs:
 ·RoadRunner Cable
| Re: [Help] Syncflood attack on Belkin A port's default state is closed, and would only be open in the case of user (or malware) or UPNP intervention.
There's nothing like an "Enable Logging" checkbox?
What model router is it? A quick look at portforward.com shows Belkin routers tend to store port settings under "Virtual Servers" within the web ui.
--
The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no warrants shall issue, but upon profitable cause... | |
| | | aerinndis
join:2008-08-27
| Re: [Help] Syncflood attack on Belkin I've been all through the menu, I can't find anything like enable logging. I'm using Belkin G Wireless F5D9230-4. There is a virtual server menu but it has a drop down list of programs to choose from, they all look like games. Then you pick the port you want to run the program through. It's not like my old Netgear router where I could open and close ports at will. This Belkin really has no features. My cousin said to enable stateful packet inspection but this router does not have that feature.
There are literally hundreds more of those syncflood attacks since I last posted. I can only assume they're not getting past the NAT firewall and these people will eventually give up. I went through all of the IP's and did a Whois lookup and emailed all of their ISP's. The ones coming from AT&T and some other one in LA stopped immediately, but new ones popped up to take their place. The Chinese ones did absolutely nothing. I feel like I'm being targeted. I know lots of people commonly scan ports but I've never seen anything like this.
That site you posted is interesting but their port checker only checks one at a time. With thousands of ports, that would be very time consuming. Wouldn't Steve Gibson's GRC Shield's Up be a better way of checking ports? | |
| | | |
Its a Secret
Whatever
Premium
join:2008-02-23
U B Funny
·Shaw
1 edit | Re: [Help] Syncflood attack on Belkin GRC would give you a better clue as to what's up. As well, do you run a SW firewall? It would be good if you did. Comodo, Online Armour, and Zone Alarm are good.
Is there a firmware update for your router? You may want to change routers if all else fails.
fookin' typos!
--
"In the future, that which is not mandatory will be illegal"
"Nobody knows the age of the human race, but everybody agrees that it is old enough to know better" - Anonymous | |
| | | | | aerinndis
join:2008-08-27
| Re: [Help] Syncflood attack on Belkin I just went to GRC and all of my ports are stealth, up to 1096 that is. I had to manually check the others because as you can see from my log, they are going for high numbered ones. There is no known protocol for port 43691, why are they probing it?
Yes I am using Comodo, the free version and also Avira for a/v protection. I can't speak for the guy downstairs....I don't think he uses anything and it's his router lol. If my ports are stealth and someone is syncflooding, does that mean my IP got picked up somewhere on a site and made it onto a hacker's list?
I did just update the firmware in hopes of stopping this or at least getting some extra features to use in the menu but there wasn't much else added that was useful. What makes me laugh is how Belkin's update button tells me there is no newer firmware but when I manually check their site I find a much newer one. I also read some other ppl had the same complaint. Their firmware updates also don't tell you what was added or changed which is also very irritating. I just think Belkin is a crappy company. | |
| | | | | |
Its a Secret
Whatever
Premium
join:2008-02-23
U B Funny
·Shaw
| Re: [Help] Syncflood attack on Belkin Whoa! You're leeching off your neighbor's router, and you did a wireless FW update?! Bad idea, as it could pooch the router.
He's the one getting hit, not you. Get your own connection, dude.
--
"In the future, that which is not mandatory will be illegal"
"Nobody knows the age of the human race, but everybody agrees that it is old enough to know better" - Anonymous | |
| | | | | | 
Woody79_00
join:2004-07-08
united state
| Yes i think what is happening is the routers NAT table is getting full and once the memory runs out it blocks the internet aka DOS as another poster mentioned.
In most cases, contacting the ISP of the offending IP is most likely usless unless your some big company. The IPs are most likely spoofed IP's anyways.
It is most likely those asian spammers from over in China and other places. My PfSense box gets "tons" of hits a day...many SQL exploit attempts and other garbage coming from there.
Luckily Snort with the latest definiions from Sourcefire bans their IP's left and right...its a constant battle.
I heard there was a vulnrability in "some" Router models from Belkin, Linksys and a few others that would allow a remote attack to bypass the router with specifically crafted packets...I am not sure what model of routers they are, but i do believe Steve Gibson at GRC.com has a webpage about it, the models listed, and even a test to see if your router is vulnerable.
Good luck to you, I would personally try getting a better router maybe...it seems they are intent in keeping you offline. If you have an old computer around, IPcop, PfSense, or Monowall could probably handle this for you. If that is too complicated for you, you could try buying an upgraded router model at a local store. one that has more memory and is on the higher end may better handle such an attack. | |
| | | | | |
Woody79_00
join:2004-07-08
united state | oh your leeching of your neighbors connection?
nevermind my previous post then
go get your own connection man! | |
| | | | | | |
Its a Secret
Whatever
Premium
join:2008-02-23
U B Funny | Re: [Help] Syncflood attack on Belkin Yea, the height of audacity...  | |
| | | | | | | | aerinndis
join:2008-08-27
| Re: [Help] Syncflood attack on Belkin Excuse me, I didn't say I was stealing anything. He bought the router so I can have internet up here. He owns the house and I am living in the upstairs part of it. I developed a disability last year and am unable to work. Applying for Social Security is a long painful process. He knows I'm up here, he bought the router for that purpose, he gave me his WEP key.
Now moving on. Would it be easier for him to call Time Warner and ask for a different IP? It's supposed to be dynamic but when we turn it off for an hour or so it picks up the same IP it had before. I thought it was supposed to flush out the old IP after being off a certain amount of time and just pick up a new one. Is the attack on the wireless router specifically or is it on his roadrunner modem? I can't really tell. | |
| | | | | | | | |
Its a Secret
Whatever
Premium
join:2008-02-23
U B Funny | Re: [Help] Syncflood attack on Belkin If you're using WEP, you're probably feeding the 'hood. WTF, man... | |
| | | | | | | | | | aerinndis
join:2008-08-27 | Re: [Help] Syncflood attack on Belkin I don't know what you mean by that but the DHCP client list only shows our computers on the network. If we were not WEP enabled then everybody in the "hood" would be feeding off of us, as you so eloquently referred to my neighborhood as. | |
| | | | | | | | | |
Its a Secret
Whatever
Premium
join:2008-02-23
U B Funny | Re: [Help] Syncflood attack on Belkin Use WPA2, it's backwards compatible to WPA, and far more secure. Use a 63 ASCII character PW from GRC: »https://www.grc.com/passwords.htm | |
| | | | | | | | | | | | | | | | | | |
sivran
Long Live The Suite
Premium
join:2003-09-15
Arlington, TX
clubs:
·RoadRunner Cable
| Re: [Help] Syncflood attack on Belkin said by NetFixer  :Most cable internet suppliers will reuse the same IP for the same connecting device unless it is left disconnected for a very long time (like a week or more). You may be able to "clone" your PC's MAC address into the Belkin routers WAN, and that should force a new WAN IP to be assigned to you (after you make the MAC address change and power cycle the cable modem). Slight caveat to that - it may just flat out break the internet access. Last time I swapped routers, power-cycling did not restore access. I had to clone the MAC from the previous router.
--
The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no warrants shall issue, but upon profitable cause... | |
| | | | | | | | | | | | | | | | | | | | aerinndis
join:2008-08-27
| Thanks guys. I don't know much about cloning. According to Shield's Up, all of my ports are stealth. Wouldn't we appear to be nonexistant to someone doing random sweeps? Just the past hour there are about 50 attacks from an IP in Columbia on port 50146. There is no known protocol for that one. There is one single attack from another IP on port 22. When I looked it up it said, SSH Remote Login Protocol. This has me slightly worried.
Yea I'm pretty sure there is something nasty on my friend's laptop. He mentioned before that he has a virus or something. I sort of have to yell at him and kick him in the butt to get him to do anything so this might be like pulling teeth fixing this problem. He mentioned that he keeps getting kicked off the internet and he gets the blue screen of death. There are no recovery discs, I never used a laptop before so I don't know anything about that. There is something about F10 recovery but as I said before, I will have to nag him to death to get him to do it. I don't know if that will fix anything now.
It doesn't seem like any of them are making it through the NAT firewall. Should I just wait for them to give up? We have nothing to steal......no credit cards, bad credit, I'd have to pay someone to steal my identity, then the student loan ppl can hound them to the gates of hell instead of me. | |
| | | | | | | | | |
sivran
Long Live The Suite
Premium
join:2003-09-15
Arlington, TX
clubs:
·RoadRunner Cable
1 edit | Re: [Help] Syncflood attack on Belkin "Known protocols" means, quite frankly, very little. Any service can be run on any port. It's just a matter of whether one wants the service to be found by "normal" users--and scripts. My ssh does not run on 22. It used to, and every once in a while, some bot would come along and try to brute-force the password (always unsuccessfully). I changed the port it listened on, and now, no bots bang on its door.
quote:
When I looked it up it said, SSH Remote Login Protocol. This has me slightly worried.
Don't be. You don't have an SSH server running, and even if you did, the port is closed to the world, and short of some sort of exploit being possible on your router, or perhaps a malware infection on yours or the other guy's pc, will remain so no matter what.
quote:
all of my ports are stealth. Wouldn't we appear to be nonexistant to someone doing random sweeps?
No. It just means your router does not respond. "stealth" isn't all its cracked up to be by Gibson. In fact, there's no difference, safety-wise, between "stealth" and closed.
If you show full "stealth" or full closed on a port scan, then you have no services open to the world, and no need to worry about "attacks" on your router -- aside from the annoyance of them possibly knocking you offline.
All that said, that doesn't mean that your roomie's virus-ridden laptop can't do anything to your computer! I hope you have firewall and antivirus software running on your machine, as the router will not protect you from an attack from within, and your computer may have something exploitable running and visible locally.
quote:
Said by NetFixer
RR may be reverting to old habits.
Well, it may just be simple laziness. This area's seen nearly a half-dozen cable ISPs, and it's been this way forever. Changing MAC address results in connectivity loss, regardless of power-cycle dancing.
--
The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no warrants shall issue, but upon profitable cause... | |
| | | | | | | | | | aerinndis
join:2008-08-27
| Re: [Help] Syncflood attack on Belkin Well I am using Comodo and Avira. I scan regularly. I like Avira because it's heuristic, although I have gotten a couple false positives from it while browsing neopets lol.
So all of that hoohaw in my security log doesn't mean much. It was knocking me offline but the last couple days it hasn't. Occasionally my internet really slows down but this could be due to the fact that just about everyone here uses RR because we only have two choices for internet in this town. I'm also using a LinkSys adapter to connect to his wireless and I think I'm losing some speed there. It is a USB device rather than a card.
I will talk to my friend about getting a different router because this one makes me feel like a duck in water. I can't really do much in the settings and it's frustrating. I can't open/close ports and it has no SPI.
I did want to ask about WAN ping blocking because ours is enabled and there have been two pingdeath attacks since my last post from Lemon Grove, California lol. Belkin says I'm protected against that but my internet sure did slow down to a crawl when it happened. | |
| | | | | | | | | |
sivran
Long Live The Suite
Premium
join:2003-09-15
Arlington, TX
clubs:
·RoadRunner Cable
| Re: [Help] Syncflood attack on Belkin Pretty much.
quote:
I did want to ask about WAN ping blocking because ours is enabled and there have been two pingdeath attacks since my last post from Lemon Grove, California lol. Belkin says I'm protected against that but my internet sure did slow down to a crawl when it happened.
Responding to pings is a good thing. Your router also sounds pretty wimpy, try to get it replaced. You can get fairly decent deals on older model WRT-54G's (the older ones have more memory) on ebay. You could probably even find some with DD-WRT or Tomato already installed.
--
The right of the people to be secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no warrants shall issue, but upon profitable cause... | |
| | | | | | | | | | 
WeenieBoy
join:2003-06-25
Pasadena, MD | To get a new IP try changing the MAC address on your router. There should be an option to clone a mac. I would cut your real mac out and change the last character then restart your router. This should get you a new IP address. Worth a shot. | |
| | 
EGeezer
Go Bobcats
Premium
join:2002-08-04
Country!
 ·Callcentric
·RoadRunner Cable
·AT&T CallVantage
| as NetFixer says, the random ports and IPs are usual internet noise, the packets to know services are usually bots scanning for vulnerabilities or issuing messenger spam, so changing your IP won't stop that stuff.
It appears the for one reason or another, your present router is unable to deal with these common packets. You might try manually updating the firmware for your model. Be sure you have the firmware for the model and hardware version of your router. The model/version information should be on the serial number label.
Ultimately, though, I'll vote with NetFixer , Woody79_00 , Its a Secret on recommendations. As sivran indicated, be prepared for possible issues when you change the router.
First, I'd dump the Belkin. It's rudimentary at best. No SYSLOG capability unless your router supports third party firmware. Many Linksys (and other) routers also don't have syslog ability unless you use third party firmware. When I contacted Linksys sales, they were very obtuse about syslog capabilities, and I had to quiz them very hard on syslog. After several minutes on hold while they tried to find someone knowledgeable, they finally admitted the models I referenced did not have syslog capability. The router NetFixer uses is a fine piece of equipment, but if it's a bit out of your price range, see a list of popular routers that provide syslog at »www.linklogger.com/download.htm . Link Logger is a frequent contributing member here. He does good work  [/plug]
Second, on changing routers; After swapping out routers, I found I had to hard reset Time Warner's and Comcast's modems to get the internet connection to come up on those services. That may be true for other ISPs too. If that doesn't work for you, call the ISP, let them know you replaced the router and they will step you through or re-authorize your router for you.
--
The greatest dangers to liberty lurk in insidious encroachment by men of zeal, well-meaning but without understanding. -- Justice Louis D. Brandeis | |
| 
GoophyDog
@charter.com
| Pick an internal address outside of the address block you are using and forward the offending port to that address.
Before doing that though, I recommend you check with the owner of the router and make sure he's not using a torrent prog, my solution could mess him up. | |
| | | |
|
·
·